LOCTITE® ECCOBOND UF 8830S
Características e Benefícios
This epoxy-based, gray, high-purity underfill encapsulant is designed for tight bump pitches and narrow gaps in flip-chip BGA applications.
LOCTITE® ECCOBOND UF 8830S is a gray, high-purity underfill encapsulant. It’s typically used for tight bump pitches and narrow gaps in flip-chip BGA applications, improving crack/fracture resistance and delivering faster flow. It exhibits a long staging time and work life and is proven stable at 260°C (500°F) reflow for Pb-free, low-k applications. LOCTITE® ECCOBOND UF 8830S is formulated with an epoxy-based resin and cures when exposed to heat. When fully cured, it forms a rigid, low-stress seal that dissipates stress in solder joints and extends thermal cycling performance.
Ler mais
Documentos e Downloads
Procurando por um TDS ou MSDS / FISPQ em outro idioma?
Informação Técnica
| Coeficiente de expansão térmica (CTE), Above Tg | 100.0 ppm/°C |
| Coeficiente de expansão térmica (CTE), Below Tg | 25.0 ppm/°C |
| Modulo de armazenamento, DMA @ 25.0 °C | 11500.0 N/mm² (1667934.0 psi ) |
| Temperatura de armazenamento | -40.0 °C |
| Temperatura de transição do vidro (Tg) | 118.0 °C |
| Viscosidade, Brookfield, @ 25.0 °C Spindle 51, Speed 5 rpm | 22120.0 mPa.s (cP) |
LOCTITE® ECCOBOND UF 8830S
This epoxy-based, gray, high-purity underfill encapsulant is designed for tight bump pitches and narrow gaps in flip-chip BGA applications.