LOCTITE® ABLESTIK NCA 2280
Lastnosti in prednosti
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.
LOCTITE® ABLESTIK NCA 2280 is specially designed for use in the assembly of temperature sensitive electronic components, and has been formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. Temporarily curing the material gives you the freedom to make any necessary adjustments to the final device configuration (the product’s high viscosity and thixotropy also help). It is black in color to prevent light penetration into the final assembled device.
Preberite več
Dokumenti in prenosi
Ali iščete tehnični list ali varnostni list v drugem jeziku?
Tehnične informacije
| Način strjevanja | Strjevanje na podlagi toplote |
| Priporočeno za uporabo s/z | Keramika |
| Strižna trdnost | 2900.0 psi |
| Temperatura skladiščenja | -20.0 °C |
| Tiksotropni indeks | 4.4 |
| Urnik strjevanja Intenzivnost svetlobe | 100.0 mW/cm² |
| Urnik strjevanja, Priporočeno | 2.0 sek. |
| Viskoznost, stožec in plošča, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 10 s⁻¹ | 54000.0 mPa.s (cP) |
| Število komponent | 1 Del |
LOCTITE® ABLESTIK NCA 2280
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.