LOCTITE® ABLESTIK NCA 2280
Značajke i prednosti
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.
LOCTITE® ABLESTIK NCA 2280 is specially designed for use in the assembly of temperature sensitive electronic components, and has been formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. Temporarily curing the material gives you the freedom to make any necessary adjustments to the final device configuration (the product’s high viscosity and thixotropy also help). It is black in color to prevent light penetration into the final assembled device.
Dodatne informacije
Dokumenti i preuzimanja
Tražite list s tehničkim podacima ili list sa sigurnosnim podacima na drugom jeziku?
Tehnički podaci
| Broj komponenti | 1 dio |
| Preporučuje se za upotrebu s | Keramika |
| Skladišna temperatura | -20.0 °C |
| Snaga smicanja | 2900.0 psi |
| Tiksotropni indeks | 4.4 |
| Tip stvrdnjavanja | Toplinsko stvrdnjavanje |
| Viskoznost, stošcem i pločom, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 10 s⁻¹ | 54000.0 mPa.s (cP) |
| Zakazano blago stvrdnjavanje | 100.0 mW/cm² |
| Zakaži stvrdnjavanje, Preporučeno | 2.0 s |
LOCTITE® ABLESTIK NCA 2280
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.