LOCTITE® ABLESTIK NCA 2280
Merkmale und Vorteile
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.
LOCTITE® ABLESTIK NCA 2280 is specially designed for use in the assembly of temperature sensitive electronic components, and has been formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. Temporarily curing the material gives you the freedom to make any necessary adjustments to the final device configuration (the product’s high viscosity and thixotropy also help). It is black in color to prevent light penetration into the final assembled device.
Weiterlesen
Dokumente und Downloads
Suchen Sie nach einem TDS oder SDS in einer anderen Sprache?
Technische Informationen
| Anzahl Komponenten | 1K |
| Aushärtetechnik | Aushärtung durch Wärme |
| Aushärtezyklus, Empfohlen | 2.0 Sek. |
| Aushärtungsplan Lichtintensität | 100.0 mW/cm² |
| Empfohlen für die Verwendung mit | Keramik |
| Lagertemperatur | -20.0 °C |
| Scherfestigkeit | 2900.0 psi |
| Thixotropie Index | 4.4 |
| Viskosität, Kegel-Platte-System, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 10 s⁻¹ | 54000.0 mPa.s (cP) |
LOCTITE® ABLESTIK NCA 2280
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.