LOCTITE® ABLESTIK NCA 2280
Vlastnosti a výhody
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.
LOCTITE® ABLESTIK NCA 2280 is specially designed for use in the assembly of temperature sensitive electronic components, and has been formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. Temporarily curing the material gives you the freedom to make any necessary adjustments to the final device configuration (the product’s high viscosity and thixotropy also help). It is black in color to prevent light penetration into the final assembled device.
Viac info
Dokumenty na prevzatie
Hľadáte TL alebo KBÚ v inom jazyku
Technické informácie
| Intenzita svetla v pláne vytvrdnutia | 100.0 mW/cm² |
| Odporúča sa používať s | Keramika |
| Pevnosť v strihu | 2900.0 psi |
| Plán vytvrdnutia, Odporúčané | 2.0 sec. |
| Počet zložiek | 1 zložka |
| Spôsob vytvrdzovania | Vytvrdzovanie teplom |
| Teplota skladovania | -20.0 °C |
| Tixotropný index | 4.4 |
| Viskozita, kužeľ a doska, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 10 s⁻¹ | 54000.0 mPa.s (cP) |
LOCTITE® ABLESTIK NCA 2280
This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.