LOCTITE® ABLESTIK NCA 2280

Vlastnosti a výhody

This high viscosity, thixotropic electrically non-conductive adhesive is specially designed for use in the assembly of temperature sensitive electronic components. It has a dual cure to allow for adjustments.
LOCTITE® ABLESTIK NCA 2280 is specially designed for use in the assembly of temperature sensitive electronic components, and has been formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. Temporarily curing the material gives you the freedom to make any necessary adjustments to the final device configuration (the product’s high viscosity and thixotropy also help). It is black in color to prevent light penetration into the final assembled device.
Oblasti Použití

Technické informace

Doporučuje se používat s Keramika
Intenzity světla v plánu vytvrzení 100.0 mW/cm²
Pevnost ve střihu 2900.0 psi
Plán vytvrzení, Doporučené 2.0 sec.
Počet složek 1 složka
Teplota skladování -20.0 °C
Tixotropní index 4.4
Viskozita, kužel & deska, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 10 s⁻¹ 54000.0 mPa.s (cP)
Způsob vytvrzování Vytvrzování teplem