LOCTITE® ABLESTIK ICP 3920
Características y Ventajas
This 1-part, low-temperature curing, electrically conductive die-attach adhesive is designed for SMD interconnect formation and stencil/screen printing.
LOCTITE® ABLESTIK ICP 3920 is a silver, electrically conductive die-attach adhesive for dispense or printing applications and surface-mount technology (SMT) assembly processes. It’s a low-viscosity, low-CTE and Pb-free alternative to solder with a long work life for minimal product waste and clean-up time. It’s formulated with an epoxy-based resin, cures fast when exposed to heat and doesn’t require any post-cure. LOCTITE ABLESTIK ICP 3920 is an improved version of ABLESTIK CE 3920 and can be used with finer dispensing needles without clogging.
Leer más
Documentos y Descargas
¿Está buscando un TDS o SDS en otro idioma?
Información técnica
| Método de aplicación | Pistola Dosificadora |
| Número de Componentes | Bicomponente |
| Programa de curado, @ 110.0 °C | 60.0 min |
| Resistencia al corte | 1310.0 psi |
| Resistividad de volumen | 0.0003 Ohm cm |
| Temperatura de almacenaje | 0.0 - 8.0 °C |
| Temperatura de funcionamiento | -45.0 - 150.0 °C |
| Tipo de curado | Curado Térmico |
| Viscosidad, Cono & Placa, Angle 3° Speed 5 rpm | 26100.0 mPa.s (cP) |
| Índice tixotrópico | 5.7 |
LOCTITE® ABLESTIK ICP 3920
This 1-part, low-temperature curing, electrically conductive die-attach adhesive is designed for SMD interconnect formation and stencil/screen printing.