LOCTITE® ABLESTIK ICP 3920
Lastnosti in prednosti
This 1-part, low-temperature curing, electrically conductive die-attach adhesive is designed for SMD interconnect formation and stencil/screen printing.
LOCTITE® ABLESTIK ICP 3920 is a silver, electrically conductive die-attach adhesive for dispense or printing applications and surface-mount technology (SMT) assembly processes. It’s a low-viscosity, low-CTE and Pb-free alternative to solder with a long work life for minimal product waste and clean-up time. It’s formulated with an epoxy-based resin, cures fast when exposed to heat and doesn’t require any post-cure. LOCTITE ABLESTIK ICP 3920 is an improved version of ABLESTIK CE 3920 and can be used with finer dispensing needles without clogging.
Preberite več
Dokumenti in prenosi
Ali iščete tehnični list ali varnostni list v drugem jeziku?
Tehnične informacije
| Delovna temperatura | -45.0 - 150.0 °C |
| Način nanašanja | Pištola za nanos |
| Način strjevanja | Strjevanje na podlagi toplote |
| Prostorninska upornost | 0.0003 Ohm cm |
| Strižna trdnost | 1310.0 psi |
| Temperatura skladiščenja | 0.0 - 8.0 °C |
| Tiksotropni indeks | 5.7 |
| Urnik strjevanja, @ 110.0 °C | 60.0 min. |
| Viskoznost, stožec in plošča, Angle 3° Speed 5 rpm | 26100.0 mPa.s (cP) |
| Število komponent | 2 Dela |
LOCTITE® ABLESTIK ICP 3920
This 1-part, low-temperature curing, electrically conductive die-attach adhesive is designed for SMD interconnect formation and stencil/screen printing.