LOCTITE® ECCOBOND FP4470
Features and Benefits
This high-purity epoxy encapsulant has excellent flow properties, so the material can penetrate fine pitch wires and deep cavities without entrapping voids.
LOCTITE® ECCOBOND FP4470 is a high-purity epoxy encapsulant with excellent flow properties, allowing the material to penetrate fine pitch wires and deep cavities without entrapping voids. It can withstand solder reflow after being exposed to JEDEC Level 2A (60°C [140°F] / 60% RH, 120 hours) preconditioning, being a high-adhesion version of LOCTITE ECCOBOND FP4450 for 260°C (500°F) L3 JEDEC performance.
Read More
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Coefficient of thermal expansion (CTE), Above Tg | 65.0 ppm/°C |
| Coefficient of thermal expansion (CTE), Below Tg | 18.0 ppm/°C |
| Color | Black |
| Cure schedule, Alternate @ 165.0 °C | 90.0 min. |
| Cure schedule, Recommended @ 125.0 °C | 30.0 min. |
| Cure type | Heat cure |
| Dielectric constant, @ 1kHz | 3.5 |
| Glass transition temperature (Tg) | 148.0 °C |
| Operating temperature | -65.0 - 150.0 °C |
| Specific gravity, @ 25.0 °C | 1.8 |
| Viscosity, Brookfield - RVF, @ 25.0 °C Spindle 6, speed 10 rpm | 42000.0 mPa·s (cP) |
| Volume resistivity | 5x10¹⁶ Ohm cm |
LOCTITE® ECCOBOND FP4470
This high-purity epoxy encapsulant has excellent flow properties, so the material can penetrate fine pitch wires and deep cavities without entrapping voids.