BERGQUIST® GAP PAD® TGP EMI1000
Známé jako Gap Pad® EMI 1.0
Vlastnosti a výhody
This thermally conductive, silicone-based, fiberglass reinforced, highly conformable gap pad filler provides EMI attenuation at frequencies of 1GHz and higher.
BERGQUIST® GAP PAD TGP EMI1000 is a highly conformable, fiberglass reinforced, combination gap filling material. It offers both thermal conductivity performance and electromagnetic energy absorption (cavity resonances and/or cross-talk causing electromagnetic interference) at frequencies of 1GHz and higher. You can expect EMI attenuation and 1.0 W/m-K thermal conductivity performance with low assembly stress, and the soft nature of the material enhances wet-out at the interface, resulting in better thermal performance than harder materials with a similar performance rating. It has an inherent, natural tack on one side of the material for improved handling and no more thermally-impeding adhesive layers. The other side is tack-free, enhancing handling and rework when you need it. It’s supplied with a protective liner on the material’s tacky side.
Oblasti Použití
Dokumenty ke stažení
Hledáte TS nebo BL v jiném jazyce?
Další dokumenty
Technické informace
Barva | Černá |
Dielektrická konstanta, @ 1kHz | 6.0 |
Hodnocení hořlavosti | V-0 |
Hustota | 2.4 g/cm³ |
Objemový odpor | 1×10 Ohm m |
Provozní teplota | -60.0 - 200.0 °C |
Průrazné napětí dielektrika | 1700.0 Vac |
Standardní tloušťka | 0.508 - 3.175 mm |
Tepelná kapacita, ASTM E1269 | 1.3 J/g-K |
Tepelná vodivost | 1.0 W/mK |
Tvrdost v jednotce shore, Thirty second delay value, ASTM D2240 Sypká pryž Shore 00 | 5.0 |