LOCTITE® ABLESTIK 6202C-X
Poznat kao ABLEFLEX 6202C-X (180G)
Elementi i pogodnosti
This B-stageable adhesive is ideal for stencil printing, especially on laminate-based packages where tolerance and bleed need to be minimized.
LOCTITE® ABLESTIK 6202C-X B-stageable adhesive is perfect for laminate-based packages where tolerance and bleed need to be minimized. This low modulus adhesive is recommended for large die sizes. It has a long work life, low moisture uptake, low flow (<150µm), low warpage and low modulus.
Pročitajte više
Dokumenti i preuzimanja
Tražite tehničke listove ili bezbednosne listove na drugom jeziku?
Tehnički podaci
| Gustina, Maximum Final | 1.1 g/cm³ |
| Jonski sadržaj koji se izvlači, Hlorid (Cl-) | 25.0 ppm |
| Jonski sadržaj koji se izvlači, Kalijum (K+) | 10.0 ppm |
| Jonski sadržaj koji se izvlači, Natrijum (Na+) | 25.0 ppm |
| Koeficijent toplotnog širenja (CTE) | 70.0 ppm/°C |
| Koeficijent toplotnog širenja (CTE), Above Tg | 232.0 ppm/°C |
| Modul elastičnosti, DMTA @ 250.0 °C | 6.0 N/mm² (812.0 psi ) |
| Primene | Dodavanje boje |
| Sila smicanja RT kalupa | 10.0 kg-f |
| Sila smicanja vrućeg kalupa | 1.0 kg-f |
| Temperatura razmekšavanja (Tg) | 40.0 °C |
| Tiksotropni indeks | 2.5 |
| Tip očvršćavanja | Očvršćavanje pomoću zagrevanja |
| Viskoznost, Brookfield CP51, @ 25.0 °C Speed 5 rpm | 30000.0 mPa.s (cP) |
LOCTITE® ABLESTIK 6202C-X
This B-stageable adhesive is ideal for stencil printing, especially on laminate-based packages where tolerance and bleed need to be minimized.