LOCTITE® ABLESTIK 6202C-X
Tuntud kui ABLEFLEX 6202C-X (180G)
Omadused ja eelised
This B-stageable adhesive is ideal for stencil printing, especially on laminate-based packages where tolerance and bleed need to be minimized.
LOCTITE® ABLESTIK 6202C-X B-stageable adhesive is perfect for laminate-based packages where tolerance and bleed need to be minimized. This low modulus adhesive is recommended for large die sizes. It has a long work life, low moisture uptake, low flow (<150µm), low warpage and low modulus.
Lugege rohkem
Dokumendid ja allalaadimised
Otsite TDS-i või SDS-i teises keeles?
Tehniline teave
| Ekstraheeritav ioonisisu, Kaalium (K+) | 10.0 ppm |
| Ekstraheeritav ioonisisu, Kloriid (CI-) | 25.0 ppm |
| Ekstraheeritav ioonisisu, Naatrium (Na+) | 25.0 ppm |
| Klaasistumistemperatuur (Tg) | 40.0 °C |
| Kuumlõike nihkejõud | 1.0 kg-f |
| RT kuumlõike nihkejõud | 10.0 kg-f |
| Rakendused | Stantskinnitus |
| Soojuspaisumise koefitsient (CTE) | 70.0 ppm/°C |
| Soojuspaisumise koefitsient (CTE), Above Tg | 232.0 ppm/°C |
| Tahkumistüüp | Kuumkõvenemine |
| Tihedus, Maximum Final | 1.1 g/cm³ |
| Tiksotroopne indeks | 2.5 |
| Tõmbemoodul, DMTA @ 250.0 °C | 6.0 N/mm² (812.0 psi ) |
| Viskoossus, Brookfield CP51, @ 25.0 °C Speed 5 rpm | 30000.0 mPa.s (cP) |
LOCTITE® ABLESTIK 6202C-X
This B-stageable adhesive is ideal for stencil printing, especially on laminate-based packages where tolerance and bleed need to be minimized.