LOCTITE® 380 - Tube 10.0/case
Known as Loctite 380 Black Max
Features and Benefits
Available sizes:
- Toughened, black
- Low viscosity
- Excellent peel, impact and sheer strength
- Temperature resistant up to 107°C (225°F)
Documents and Downloads
- Bottle 10.0/case - IDH 135423
- Bottle 10.0/case - IDH 135424
- Tube 10.0/case - IDH 232834
Size Case: Bottle
Quantity: 10.0/case
Size Case: Bottle
Quantity: 10.0/case
Size Case: Tube
Quantity: 10.0/case
Looking for a TDS or SDS in another language?
Technical Information
| Color | Black |
| Fixture time | 90.0 sec. |
| Gap fill | 0.1 mm |
| Physical form | Liquid |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured.Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452. Spray or drop activator onto excess product.
Equipment
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.
Frequently Asked Questions
What does it mean when an instant adhesive (CA) is toughened?
Why is there a white haze on my parts around the bond area?
Do instant adhesives (CA) need to be refrigerated?
Why does my plastic crack when I use an instant adhesive (CA)?
What health and safety (H&S) precautions do I need to take when using this adhesive?
LOCTITE® 380