LOCTITE® 222MS - Bottle 10.0/case Purple Low Strength Threadlocker
Known as LOCTITE 222MS Purple Threadlocker Low Strength/Small Screw MIL SPEC
Features and Benefits
Available sizes:
Threadlocker for small fasteners under 6mm (¼"). Low strength, removable with hand tools.
LOCTITE® 222MS is a purple, low strength, military-spec threadlocker ideal for fastener diameters of up to 6.35mm (1/4"). Its controlled lubricity allows for accurate clamp loads. Parts can be easily disassembled using ordinary hand tools. Applications include adjustment screws, countersunk head screws, and set screws on collars, pulleys, tool holders and controllers. Suitable for use with low-strength metals, such as aluminum or brass.
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents fastener loosening on vibrating assemblies, e.g. pumps, gear boxes, presses
- Ideal for small thread sizes up to 6.36 mm (1/4")
- Can be disassembled with ordinary hand tools for easy service & maintenance
- Meets Mil Spec: Mil-S-46163A Type II Grade M; NSF P1 Reg. No. 123001
Documents and Downloads
Safety Data Sheets and RoHs
- Bottle 10.0/case - IDH 135333
- Bottle 10.0/case - IDH 135334
- Bottle 10.0/case - IDH 135335
- Tube 100.0/case - IDH 231483
LOCTITE® 222MS, 250 ml Bottle 135335 en-US
IDH:
135335
EAN:
079340222410
Size Case: Bottle
Quantity: 10.0/case
LOCTITE® 222MS, 0.50 ml Tube 231483 en-US
IDH:
231483
EAN:
079340222052
Size Case: Tube
Quantity: 100.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Breakaway torque, M10 Steel Nuts/Bolts | 6.0 N·m (53.0 in./lb. ) |
| Color | Purple |
| Fixture time | 20.0 min. |
| Key characteristics | General purpose, Strength: low Strength, Thixotropic |
| Number of components | 1 part |
| Operating temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
| Prevail torque, M10 Steel Nuts/Bolts | 4.0 N·m (30.0 in./lb. ) |
| Viscosity, @ 25.0 - 77.0 Speed 20 rpm | 1200.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE SF 7070 to degrease and clean surfaces prior to applying threadlocker.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
3a. Application - Through Hole
Apply a few drops of liquid threadlocker to the thread engagement area. Assemble nut and tighten to proper torque.
3b. Application - Blind Hole
Apply several drops of liquid threadlocker into lower third of blind hole, as well as a few drops onto male threads, and then install male threads. Tighten to proper torque.
4. Assembly
Assemble and tighten to proper torque requirement. If several screws/small bolts are being assembled, torque them down to the correct value within the fixture time window.
5. Disassembly
Disassemble with standard hand tools.
Where to Buy
Buy Online
LOCTITE® 222MS
Threadlocker for small fasteners under 6mm (¼"). Low strength, removable with hand tools.
- Bottle 10.0/case - IDH 135333
- Bottle 10.0/case - IDH 135334
- Bottle 10.0/case - IDH 135335
- Tube 100.0/case - IDH 231483
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
What products can I use to prevent vibration loosening of parts? How do I prevent vibration loosening and leak paths?
What temperatures can threadlockers/thread sealants/gasketing materials work up to?
Are threadlockers/sealants/gasketing materials resistant to fluids such as gasoline, diesel, engine oil, water, glycol, acids, alkalis, hydraulic fluid, etc.?
Can threadlockers be used as thread sealants? Can thread sealants be used as threadlockers?
What health and safety (H&S) precautions do I need to take with this type of product?
LOCTITE® 222MS
Threadlocker for small fasteners under 6mm (¼"). Low strength, removable with hand tools.