LOCTITE® AA 3504

Відомий як LOCTITE 3504

Особливості та переваги

A 1-part, medium-viscosity, anaerobic-cure structural adhesive for bonding ferrites to electroplated metal parts.
LOCTITE® AA 3504 is an amber, urethane methacrylate-based structural adhesive. It’s typically used for bonding ferrites to plated materials in electric motors, loudspeaker hardware, and jewellery, where fast-fixturing is required and adhesive outside the bond line must be completely cured. It offers good resistance to impact and humidity and tolerates operating temperatures up to 120°C (248°F). LOCTITE AA 3504 is a 1-part adhesive but requires activator LOCTITE® SF 7649 before use. It can be cured when exposed to UV radiation of 365 nm. To obtain full cure on surfaces exposed to air, radiation at 250 nm is also required.
Дізнайтеся більше

Документи та завантаження

Технічна інформація

В’язкість, віскозиметр Brookfield – серія RVT, @ 25.0 °C Spindle 3, speed 20 rpm 800.0 - 1300.0 мПа·с (спз)
Колір Бурштин
Міцність на зсув 22.0 Н/мм²
Основні характеристики Змішування: Не потрібно змішувати