LOCTITE® 382
Features and Benefits
Available sizes:
- Suitable for rubbers and metals
- Suitable for plastics and polyolefins with Primer LOCTITE 770 or LOCTITE 7239
- General purpose gel
- Fixture time 20 - 40 secs.
Documents and Downloads
- Bottle 10.0/case - IDH 135425
- Bottle 4.0/case - IDH 201507
Size Case: Bottle
Quantity: 10.0/case
Size Case: Bottle
Quantity: 4.0/case
Looking for a TDS or SDS in another language?
Technical Information
| Colour | Ultra clear |
| Fixture time | 20.0 - 40.0 sec. |
| Gap fill | 0.15 mm |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE® SF 7063/7064 to clean and degrease surfaces prior to bonding. Ensure the cleaning solvent is compatible with the materials to be bonded and has dried prior to adhesive application.
2. Preparation - Activation
Apply LOCTITE®SF 7455 or LOCTITE® SF 7458 activator to the bond area, by spray, brush or dipping. Allow the activator time to evaporate, under good ventilation, until the surfaces are completely dry (approx. 15 to 30 seconds).
3. Application & Assembly
Apply LOCTITE® 382 to the bond area and assemble the parts. Where possible, move surfaces in relation to each other for a few seconds to distribute the adhesive and for maximum activation. Secure the assembly and await fixturing before any further handling. If necessary excess product can be cured by activator LOCTITE® SF 7455 or LOCTITE® SF 7458.
Frequently Asked Questions
Why does my plastic crack when I use an instant adhesive (CA)?
Why is there a white haze on my parts around the bond area?
Do instant adhesives (CA) need to be refrigerated?
What health and safety (H&S) precautions do I need to take when using this adhesive?
Which products are food / drinking water approved?
LOCTITE® 382