LOCTITE® CL30 LED Flood Curing Single Controller
Poznano kot LOCTITE 97104
Lastnosti in prednosti
slide 1 of 2
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.
This LOCTITE® CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Flood Arrays to cure UV and visible light cure adhesives. The Flood Arrays are available in 365 nm (item #2139182) and 405 nm (item #2139180) wavelengths. It controls the time that the LED is kept on during the cure cycle. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through.
Preberite več
Tehnične informacije
| Primeri uporabe | Strjevanje z napravo LED Flood Array |
| Uporablja se za točenje | Lepila za utrjevanje z UV in vidno svetlobo |
| Valovna dolžina, Item #2139180 | 405.0 nm |
| Valovna dolžina, Item #2139181 | 380.0 nm |
| Valovna dolžina, Item #2139182 | 365.0 nm |
| Vrsta žarnice, Priporočeno | LED |
LOCTITE® CL30 LED Flood Curing Single Controller
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.
