LOCTITE® SF 7649
Features and Benefits
Available sizes:
Solvent-based activator for promoting the cure speed of LOCTITE anaerobic adhesives and sealants. Prepares surfaces to increase cure speed without loss of joint strength.
LOCTITE® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. LOCTITE SF 7649 offers good performance at low cure temperatures, and is recommended when the application temperature is below 15°C.
- Increases cure speed on passive and inactive surfaces
- For low-temperature curing (< 5°C)
- For large bond gaps
Documents and Downloads
Safety Data Sheets and RoHs
- Aerosol Can 10.0/case - IDH 209715
- Can 1.0/case - IDH 990024
LOCTITE® SF 7649, 1 gal Can 990024 en-NZ
IDH:
990024
EAN:
9310743006926
Size Case: Can
Quantity: 1.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Brush, Pre-applied, Spray |
| Applications | Anaerobic priming, Gasketing, Pipe sealing, Retaining, Thread sealing, Threadlocking |
| Chemical basis / base | Acetone |
| Colour | Green |
| Cure type | Non-curing |
| Key characteristics | Cure Accelerant, Enables low temperature curing |
| Physical form | Liquid |
| Recommended for use with | Metal, Metal: passive metal |
LOCTITE® SF 7649
Solvent-based activator for promoting the cure speed of LOCTITE anaerobic adhesives and sealants. Prepares surfaces to increase cure speed without loss of joint strength.