Skip to Content
Henkel Adhesive Technologies
Recent searches

      Henkel Adhesive Technologies
      Loctite Technology Cluster Brand for Product Detail Pages

      Part no. (SKU/IDH):
      135286

      IDH Name:
      LOCTITE® SF 7649, 1.75 oz Bottle

      Adhesive activators

      LOCTITE® SF 7649

      Prepares surfaces to increase cure speed without loss of joint strength

      A solvent-based activator for promoting the cure speed of LOCTITE anaerobic adhesives and sealants. Prepares surfaces to increase cure speed without loss of joint strength.

      Part no. (SKU/IDH):
      135286

      IDH Name:
      LOCTITE® SF 7649, 1.75 oz Bottle
      Part no. (SKU/IDH) 135286
      LOCTITE® SF 7649, 1.75 oz Bottle

      Size Please make your selection 1.75 oz

      Packaging type Please make your selection Bottle

      All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.

      Information

      LOCTITE® SF 7649 is specially designed to promote the cure speed of LOCTITE® anaerobic adhesives and sealants without any significant loss of joint strength. Ideal for applications with passive metals or inert surfaces and with large bond gaps, it offers great performance at low cure temperatures (< 15°C / < 60°F).
      • Promotes the cure speed of LOCTITE anaerobic adhesives & sealants
      • For use on applications with passive metals & inert surface
      • Low-temperature cure (< 15°C / < 60°F)
      • For large bond gaps

      How to use

        It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.

        LOCTITE® SF 7649 can be either sprayed or brushed onto one or both mating surfaces. For smaller gaps, it is only necessary to apply the accelerator to one surface. Pourous surfaces my require two treatments of activator.

        Allow the solvent carrier of the activator to evaporate off completely so that the parts are dry to the touch. The accelerator has an on-part life of 30 days. Within that window of time, the anaerobic can be applied normally.

      FAQ

        Henkel recommend the use of primers such as LOCTITE® SF 7649 & SF 7471 with most anaerobics where both parts are classified as "inactive" metals. These metals lack the presence of iron or copper content and thus, lack the "active" metal ions required to fully cure the anaerobic product in 24 hours. These metals include plated parts, stainless steel, galvanized steel and anodized aluminum, to name a few. If, on the other hand, both or at least one part is an "active" metal, such as plain steel, brass, bronze, copper or iron, there is no need to use a primer to ensure full cure in what is typically 24 hours at room temperature. A primer will also be helpful to accelerate the cure in colder temperatures or where there are larger gaps between the metal components.

      Recently viewed products

      Request a consultation

      Unplanned downtime or lower plant productivity can prevent you from achieving the manufacturing excellence that you are looking for. Consult with our experts to find ways to make your machine more reliable and reduce unplanned downtime to save costs.
      Contact an expert

      Henkel Adhesive Technologies
      Company
      About us
      Locations
      Careers
      News
      Current Customer eShop
      Sustainability
      Help
      FAQs
      Find a TDS
      Find a SDS
      Find a distributor
      Contact us
      Resource center
      Product search
      Technical Library
      Case studies
      White papers
      Webinars
      Brochures
      Social media
      ⓒ 2025 Henkel Corporation. ALL RIGHTS RESERVED
      You are on a United States website