LOCTITE® 510 Gasket Sealant
Features and Benefits
This form-in-place anaerobic-curing gasketing sealant provides high temperature and chemical resistance on close fitting, rigid machined metal flanges.
LOCTITE® 510 is a high-temperature resistant, form-in-place anaerobic-curing sealant, which forms an instant, low-pressure seal when confined in the absence of air between close fitting metal surfaces. Ideal for rigid flanges, especially in transmissions and motor casings. Unprimed gap-fill is 0.25 mm (0.01"). Recommended for use with aluminum and steel substrates.
- For close fitting, rigid metal flanges
- Temperature resistant up to 204°C (400°F)
- Adapts to surface irregularities and scratches up to 0.01" (0.25mm)
- Increases torque capacity of assembled flanges
- Registered to NSF Category P1
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
Application method | Dispense system, Manual, Screen printing |
Applications | For close fitting parts, For high temperature applications, Rigid assembly gasketing, Sealing |
Chemical basis / base | Dimethacrylate ester |
Color | Pink |
Cure type | Anaerobic cure |
Fixture time, Steel | 25.0 min. |
Gap fill, Unprimed | 0.25 mm |
Key characteristics | Chemical resistant, For machined, rigid flanges, Strength: medium strength, Thixotropic |
Number of components | 1 part |
Operating temperature | -65.0 - 400.0 °F (-55.0 - 200.0 °C ) |
Physical form | Gel |
Recommended for use with | Metal: aluminum, Metal: steel |
Storage temperature | 8.0 - 21.0 °C |
Viscosity, 20 RPM | 90000.0 mPa·s (cP) |