LOCTITE® 425
Features and Benefits
Ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners.
LOCTITE® 425 is a dark blue ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners. It is designed for pre- or post-application. Fixture speed can be increased by using a LOCTITE cyanoacrylate activator - e.g. LOCTITE SF 7113. It is typically used in applications with an operating range of -54 °C to +85 °C.
- Cures within two minutes on plated metal and plastics fasteners with full strength in 24 hours
- Used for tamper proofing the heads of screws or potentiometers
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense gun |
| Applications | Threadlocking |
| Colour | Dark blue |
| Cure type | Moisture cure |
| Fixture time | 90.0 sec. |
| Full cure time, @ 25.0 °C | 24.0 hr. |
| Key characteristics | Cure speed: fast cure, General purpose, Mix: no mix required, Strength: low Strength |
| Number of components | 1 part |
| Physical form | Liquid |
| Recommended for use with | Metal, Plastic |
| Specific gravity, @ 25.0 °C | 1.1 |
| Viscosity, Brookfield - LVF, @ 25.0 °C Spindle 1, speed 30 rpm | 40.0 - 80.0 mPa·s (cP) |
LOCTITE® 425
Ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners.