LOCTITE® 6300
Features and Benefits
Available sizes:
A 1-part, high strength, low-viscosity retaining compound for bonding cylindrical fitting parts.
LOCTITE® 6300, part of the Health and Safety anaerobic range, is a green, high-strength retaining compound for bonding cylindrical fitting parts, suitable for a maximum diametrical clearance of 0.15 mm (0.006"). It's typically used for holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts, but is also approved for use on bearings. This low-viscosity dimethacrylate ester acrylic liquid cures when confined in the absence of air between close-fitting metal surfaces or when exposed to UV light of sufficient intensity. It’s designed to prevent loosening and leakage from shock and vibration.
- Label-free
- Anaerobic-curing
- Secondary cure (activator) available
- High strength
- Fluorescent under UV for quality control
Documents and Downloads
Safety Data Sheets and RoHs
- 50 ml Bottle - IDH 1949014
- 250 ml Bottle - IDH 1949015
LOCTITE® 6300, 50 ml Bottle 1949014 en-FR
IDH:
1949014
EAN:
5010266009988
Size Case: 50 ml Bottle
LOCTITE® 6300, 250 ml Bottle 1949015 en-FR
IDH:
1949015
EAN:
5010266010014
Size Case: 250 ml Bottle
No documents found
Looking for a TDS or SDS in another language?
Technical Information
Color | Green |
Fixture time | 10.0 min. |
Gap fill | 0.15 - 0.25 mm |
Key characteristics | Strength: high strength, Temperature: high temperature |
Operating temperature | -55.0 - 180.0 °C (-65.0 - 355.0 °F ) |
Recommended for use with | Metal: aluminum, Metal: brass, Metal: steel, Metal: steel - stainless steel |
Shear strength, Steel | 15.0 N/mm² (2180.0 psi ) |
Viscosity | 350.0 mPa·s (cP) |