LOCTITE® PC 7641
Features and Benefits
slide 1 of 1
A 2-part, epoxy sealing system designed to increase the adhesion and coverage of LOCTITE non-slip coatings on various porous substrates.
LOCTITE® PC 7641 is a clear, 2-part, epoxy sealing system designed to increase the adhesion and coverage of LOCTITE® non-slip coatings on concrete, wood, tile and other porous substrates. It is used as a base coat for LOCTITE non-slip coatings, except LOCTITE® PC 6255 acrylic pedestrian grade coating. It dries quickly, ensuring good inter-coat adhesion with topcoats. Its operating range is -29°C to 60°C (-20.2°F to 140°F).
- Low odor and VOC
- Applies easily
- Increases adhesion and coverage of LOCTITE non-slip coatings
- Resists abrasion
- Resists most mild acids, alkalis, salts, gasoline and oils
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
Color | Clear |
Cure type | Room temperature (ambient) cure |
Key characteristics | Abrasion resistant, Chemical resistant, Odor: low odor, VOC: reduced VOC |
Mix ratio, by volume | 3 : 1 |
Number of components | 2 part |
Recoat time | 6.0 hr. |
Recommended for use with | Concrete, Wood |