LOCTITE® PC 7641
Features and Benefits
Available sizes:
2-part, epoxy sealing system designed to increase the adhesion and coverage of LOCTITE non-slip coatings on various porous substrates.
LOCTITE® PC 7641 is a clear, 2-part, epoxy sealing system designed to increase the adhesion and coverage of LOCTITE® non-slip coatings on concrete, wood, tile and other porous substrates. It is used as a base coat for LOCTITE® non-slip coatings, except LOCTITE® PC 6255 acrylic pedestrian grade coating. It dries quickly, ensuring good inter-coat adhesion with topcoats. Its operating range is -29°C to +60°C.
- Low odor and VOC
- Applies easily
- Increases adhesion and coverage of LOCTITE non-slip coatings
- Resists abrasion
- Resists most mild acids, alkalis, salts, gasoline and oils
Documents and Downloads
Safety Data Sheets and RoHs
- Can 1.0/case - IDH 1617851
LOCTITE® PC 7641, 1 gal Can 1617851 en-CA
IDH:
1617851
EAN:
079340002159
Size Case: Can
Quantity: 1.0/case
Download SDS
LOCTITE PC 7641 A known as LOCTITE BF PRIMER/SEALER PT A IDH: 1617851 EN/CA (1 of 2)
LOCTITE PC 7641 A known as LOCTITE FM WB EPXY PRM/SEAL PTA IDH: 1617851 EN/CA (2 of 2)
Download RoHs
IDH: 1617851 EN/CA (1 of 4)
IDH: 1617851 EN/CA (2 of 4)
IDH: 1617851 EN/CA (3 of 4)
IDH: 1617851 EN/CA (4 of 4)
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Color | Clear |
| Cure type | Room temperature (ambient) cure |
| Key characteristics | Abrasion resistant, Chemical resistant, Odor: low odor, VOC: reduced VOC |
| Mix ratio, by volume | 3 : 1 |
| Number of components | 2 part |
| Recoat time | 6.0 hr. |
| Recommended for use with | Concrete, Wood |
LOCTITE® PC 7641
2-part, epoxy sealing system designed to increase the adhesion and coverage of LOCTITE non-slip coatings on various porous substrates.