LOCTITE® CL30 LED Flood Curing Single Controller - Mixed 1.0/case
Known as LOCTITE 97104
Features and Benefits
Available sizes:
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Flood Light Sources.
This LOCTITE® CL30 LED Flood Curing Single Controller powers the LOCTITE CL30 LED Flood Light Sources to cure UV and visible light cure adhesives. The LED flood light sources are available in 365nm and 405nm wavelengths (item #2139182 and 2139180, respectively). It controls the time that the LED is kept on during the cure cycle. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through.
- LED flood curing system offering long-life, energy-efficient, instant on/off performance
- High Intensity
- Indicator lights for status and alarms
- Included in the Box: (1) CL30 LED Flood Curing Single Controller, (1) AC power cord, (1) operating manual
- LED heads stackable in both X and Y directions
- Large cure area – 100mm x 100mm
- Digital cure time indicator 0.1 to 99.9 seconds
- End of Cycle signal and Error Relay signal available via output connector
- RoHS compliant
- Components required for operation: (1) controller, (1) light source
Technical Information
| Applications | LED flood array curing |
| Bulb type, Recommended | LED |
| Used to dispense | UV and visible light cure adhesives |
| Wavelength, Item #2139180 | 405.0 nm |
| Wavelength, Item #2139181 | 380.0 nm |
| Wavelength, Item #2139182 | 365.0 nm |
How to
LOCTITE CL30 Flood System
LOCTITE® CL30 LED Flood Curing Single Controller
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Flood Light Sources.