LOCTITE® 5452 - Tube 10.0/case

Features and Benefits

Available sizes:

Tube

10.0/case

Tube

10.0/case
TDS Download
Designed for sealing threaded fittings in hydraulic and pneumatic systems, this product's thixotropic behavior allows ease of use.
LOCTITE® 5452 is a purple, thixotropic, anaerobic-curing thread sealant liquid designed for sealing threaded fittings in hydraulic and pneumatic systems. The thixotropic nature makes it suitable for large diameter pipes, and the sealant contains no fillers or particles that can interfere with a hydraulic system. It is useful with dry seal fittings such as O-Ring boss-style connectors by preventing loosening that can ultimately lead to leakage. It can be used as a sealant on mating surfaces of flare style fittings.
  • Suitable for large diameter pipes
  • Prevents thread loosening
  • Contains no fillers or particles that can interfere with hydraulic systems
Read More

Documents and Downloads

Technical Data Sheet
LOCTITE® 5452™
Download TDS
Safety Data Sheets and RoHs
  • Tube 10.0/case - IDH 1265769
  • Tube 10.0/case - IDH 1265770
LOCTITE® 5452, 250 ml Tube 1265770 en-US
IDH: 1265770
EAN: 079340438316

Size Case: Tube

Quantity: 10.0/case

Download SDS

Download RoHs
No documents found

Looking for a TDS or SDS in another language?

Search for TDS in another language
Search for SDS in another language

Technical Information

Breakaway torque, M10 Black Oxide Bolts 3.5 N·m (31.0 in./lb. )
Color Purple
Key characteristics Cure speed: fast cure, Thixotropic, Viscosity: high viscosity
Operating temperature -65.0 - 360.0 °F (-55.0 - 180.0 °C )
Physical form Liquid
Viscosity, 20 RPM 28000.0 mPa·s (cP)

How to

Step by Step Guide

1. Preparation - Cleaning

For best results, clean all surfaces (external and internal) with a LOCTITE®cleaning solvent and allow to dry.

2. Preparation - Activation

Use Activator 7471 or 7649 prior to application of sealant and allow to dry, if quicker service time is required.

3. Assembly

For NPT or other taper joint fittings apply a 360° band of sealant to leading threads of the male fitting. For larger threads and gaps, adjust the volume of sealantaccordingly. For ORB & O-Ring Fittings apply a 360° band of sealantto the threads for the male fitting. Ensure product is applied into roots of the threads and adequate coverage. For JIC Fittings coat the face of the male JIC with the sealant. This is applicable for new and damaged fittings. Also apply to threads for vibration resistance.

4. Disassambly

Remove with standard hand tools. Where hand tools do not work because of excessive engagement length or large diameters (over 25 mm), apply localized heat to approximately 480 °F. Disassemble while hot.

5. Cleanup

Cured product is most easily removed with mechanical abrasion such as a wire brush and wiped Fittings if mechanically acceptable can normally bereused once cleaned. clean with acotton cloth.

Frequently Asked Questions