LOCTITE® 4013 - Bottle 10.0/case
Features and Benefits
Available sizes:
A fast-fixturing, medium-viscosity instant adhesive suitable for the assembly of disposable medical devices.
LOCTITE® 4013 is a medium-viscosity instant adhesive (medical device grade) designed for the assembly of a wide range of materials. It provides fast room-temperature fixturing. Using primer LOCTITE® SF 7701, the assembly of difficult-to-bond (PP, PE, PTFE) materials is possible. LOCTITE 4013 is tested to Henkel's ISO 10993 protocols for use in disposable medical devices.
- General purpose medical device instant adhesive
- Assembles difficult-to-bond plastics when LOCTITE® SF 7701 primer used
- ISO-10993 biocompatible
Documents and Downloads
Safety Data Sheets and RoHs
- Bottle 10.0/case - IDH 237041
- Bottle 10.0/case - IDH 88129
LOCTITE® 4013, 20 g Bottle 237041 en-US
IDH:
237041
EAN:
079340202689
Size Case: Bottle
Quantity: 10.0/case
LOCTITE® 4013, 1 lb Bottle 88129 en-US
IDH:
88129
EAN:
079340180130
Size Case: Bottle
Quantity: 10.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Agency approvals / certificates / specifications | ISO 10993 |
| Color | Light yellow, Translucent |
| Cure type | Moisture cure |
| Key characteristics | Viscosity: medium viscosity |
| Number of components | 1 part |
| Physical form | Liquid |
| Recommended for use with | Acrylonitrile butadiene styrene (ABS), Polycarbonate |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 7701 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use activator LOCTITE® SF 713 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured.Hint: if necessary, excess product can be cured by activator LOCTITE® SF 713. Spray or drop activator onto excess product.
Frequently Asked Questions
What does "medical device grade adhesive" mean?
Are certificates of biocompatibility test available?
Do instant adhesives (CA) need to be refrigerated?
What health and safety (H&S) precautions do I need to take when using this adhesive?
Why does my plastic crack when I use an instant adhesive (CA)?
Why is there a white haze on my parts around the bond area?
LOCTITE® 4013
A fast-fixturing, medium-viscosity instant adhesive suitable for the assembly of disposable medical devices.