LOCTITE® CL30 LED Flood Curing Quad Controller
Features and Benefits
The LOCTITE CL30 LED Flood Curing Quad Controller supplies power and control for up to four (4) LOCTITE LED Flood Arrays to cure UV and visible light cure adhesives.
The LOCTITE® CL30 LED Flood Curing Quad Controller supplies power and control for up to four (4) LOCTITE CL30 LED Flood Array Light Sources, which are offered in 365 nm (item #2139182) and 405 nm (item #2139180) wavelengths. It is used to cure UV and visible light cure adhesives. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through. The CL30 LED Flood Curing Quad Controller has three different control modes: 1) Timer Mode: Adjustable from 0 to 999 seconds; 2) Level Mode: To set up intensity percentage for each channel; and 3) Advance Mode: Operator needs to define Step, Intensity, and Time.
- LED flood curing system offering long-life, energy-efficient, instant on/off performance
- Intensity adjustment for each channel
- Timed On/Off control via the built-in timer on the front panel, 0 to 999 seconds
- Stackable on 100 mm center-to-center spacing in both X and Y directions
- Included in the Box: (1) CL30 LED Flood Curing Quad Controller, (1) AC power cord, (1) foot switch, (1) operating manual
- Controls up to 4 LED flood heads
- Lasts up to 10 times longer than traditional arc lamps, with negligible output decay during duty cycle
- Manual On/Off operation via the foot switch
- Resistive color touch screen for ease of operation
- End of Cycle signal and Error Relay signal available via output connector
- Optimal curing distance: 50 mm
- 100% duty cycle
- Intensity adjustment with Quad Controller
- RoHS compliant
- Components required for operation: (1) Controller, 1 or more light sources
Technical Information
| Applications | LED flood array curing |
| Bulb type, Recommended | LED |
| Used to dispense | UV and visible light cure adhesives |
| Wavelength, Item #2139180 | 405.0 nm |
| Wavelength, Item #2139182 | 365.0 nm |
LOCTITE® CL30 LED Flood Curing Quad Controller
The LOCTITE CL30 LED Flood Curing Quad Controller supplies power and control for up to four (4) LOCTITE LED Flood Arrays to cure UV and visible light cure adhesives.