LOCTITE® 401 - Tube 10.0/case
Features and Benefits
Product image in this size is not available.
Available sizes:
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.
- Universal instant adhesive
- Very high strength on close-fitting parts
- Perfect for all quick repairs and all types of small emergency repairs
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics, as well as most plastics)
Documents and Downloads
Safety Data Sheets and RoHs
- Bottle 12.0/case - IDH 142576
- Bottle 12.0/case - IDH 1919341
- Tube 10.0/case - IDH 87993
LOCTITE® 401, 50 g Bottle 142576 en-GB
IDH:
142576
EAN:
5010266401508
Size Case: Bottle
Quantity: 12.0/case
LOCTITE® 401, 3 g Tube 87993 en-GB
IDH:
87993
EAN:
5010266010915
Size Case: Tube
Quantity: 10.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense system, Manual |
| Applications | Bonding close fitting parts, Repairing |
| Colour | Clear |
| Cure type | Moisture cure |
| Fixture time, Steel | 5.0 sec. |
| Gap fill | 0.15 mm |
| Key characteristics | General purpose, Strength: high strength, Viscosity: low viscosity, fixture: very fast fixture |
| Operating temperature | -40.0 - 120.0 °C (-40.0 - 250.0 °F ) |
| Physical form | Liquid |
| Recommended for use with | Elastomer, Metal, Plastic, Porous surface |
| Shear strength, Mild Steel (grit blasted) | 20.0 N/mm² (2900.0 psi ) |
| Viscosity | 100.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 7239 or LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use appropriate activator LOCTITE® SF 7458 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7458 or LOCTITE® SF 7455. Spray or drop activator onto excess product.
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.
Where to Buy
Buy Online
LOCTITE® 401
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.
- Bottle 12.0/case - IDH 142576
- Bottle 12.0/case - IDH 1919341
- Tube 10.0/case - IDH 87993
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
Which products can be used on metals / plastics?
What health and safety (H&S) precautions do I need to take with product “X”?
Which products are food / drinking water approved?
LOCTITE® 401
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates.