LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Lastnosti in prednosti
Designed for simple and easy control of LOCTITE CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Preberite več
Tehnične informacije
| Intenzivnost svetlobe, For 380nm source | 1.0 - 18.0 W/cm² |
| Intenzivnost svetlobe, For 405nm source | 1.0 - 27.0 W/cm² |
| Primeri uporabe | LED Točkovno strjevanje |
| Uporablja se za točenje | Lepila za utrjevanje z UV in vidno svetlobo |
| Valovna dolžina, Item #2183339 | 380.0 nm |
| Valovna dolžina, Item #2183340 | 405.0 nm |
| Vrsta delovanja | UV Vis |
| Vrsta žarnice, Priporočeno | LED |
LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Designed for simple and easy control of LOCTITE CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.