LOCTITE® Threadlocking 

for Automotive Repair (e.g. engine block or brake back-plates)

A car is held together on average  with around 3,500 fasteners. This means 3,500 potential places where vibrational loosening can cause the threaded assembly to fail. To avoid these failures from happening, LOCTITE® Threadlockers are a reliable alternative to mechanical fastening. Available in varying strengths and temperatures, adhesive threadlockers perform reliably and effectively on fasteners of any type and size, either before or after assembly. And all with the same purpose and function: to ensure a durable and reliable assembly.

But first: Why use anaerobic liquid threadlockers instead of mechanical fasteners? See a quick side by side comparison

Get the Materials

Using adhesive threadlockers is a great alternative to mechanical fastening with e.g. tab washers, nylon ring or with locking devices such as saw-tooth flanged bolts. LOCTITE® Threadlockers come in many forms and shapes − from low − to high strength. Make sure to select the right adhesive for your needs and also have cleaner and primer or activator at hand (where needed).

Sign up for e-learning session


All repair and maintenance tasks shown should be done by professionals only. Please do not try this at home or if not qualified by professional education. Always follow car manufacturer's instructions.
Limitation of liability

STEP 1

Cleaning

To achieve optimum results, all  old parts need to be clean and free of oil / grease prior to bonding. It is recommended to use LOCTITE® SF 7063 to degrease and clean surfaces prior to applying adhesive.
For nuts and bolts, wrap the cloth around the threads and turn. Wipe in one direction − not back and forth.  Clean the part until it no longer discolours the cloth.

 

Tip: For through holes or blind holes, apply cleaner and clear the hole with clean, dry compressed air.

Optional: Reuse bolt

If you need to reuse a threadlocker bolt, cured threadlocker will need to be removed from the threads. Cured product can be removed with a combination of soaking in a solvent and mechanical abrasion such as a wire brush.

STEP 2 − use activator (optional)

If you need to speed up the curing, use activators. They are particularly useful when using passive substrates (such as stainless steel, zinc plated bolts or zinc flake coatings) to help initiate the curing process and provide a more robust cure.
The activator is applied on one surface, e.g. on the through hole or on the nut and the adhesive on the other surface, e.g. on the bolt thread. The curing process begins immediately after two parts have been joined.

STEP 3 − Option 1

Apply the adhesive —Through-hole

Assemble bolt first and then apply threadlocker. Fit nut and tighten to correct torque.

Tip: A minimal amount of threadlocker squeezing out from the nut and bearing surface interface indicates that sufficient volume of product has been used to fill the clearance.

STEP 3 − Option 2

Apply the adhesive — Blind hole

For blind hole applications, drops of liquid threadlocker should be applied down the female threads into the bottom third of the hole and the bottom of the hole. Once the bolt threads become engaged with coated blind hole threads, the air will push the threadlocker towards the exit of the hole creating proper coverage. 

STEP 3 − Option 3

Apply the adhesive — Post-assembly

Use this when you have an already threaded assembly that has been corrected in position or after locking adjustment screws.  Use use a wicking grade threadlocker. The product should be applied at the nut and bolt junction.

STEP 3 − Option 4

Apply the adhesive — Threadlocker Stick

Use if you need flexibility for tough applications, especially overhead, and on components that cannot be moved. Twist stick to the amount required. Apply sufficient product around the thread of the bolt.

STEP 4

Assembly

Assemble and tighten. 

STEP 4

If several bolts are being assembled, torque them down to the correct value within the fixture time of the product or use slow curing product.

STEP 5

Disassembly

If disassembly with standard hand tools is not possible, apply localised heat at approximately 250°C for easy dismantling (while hot).

Related Topics

Featured Products

Get in touch

Find a distributor
Contact us
Subscribe to our eNews

Frequently Asked Questions

ANSWERS TO YOUR MOST COMMON QUESTIONS

Limitation of Liability

The information provided herein, especially recommendations for the usage and the application of our products, is based upon our knowledge and experience. Due to different materials used as well as to varying working conditions beyond our control we strictly recommend to carry out intensive trials to test the suitability of our products with regard to the required processes and applications. We do not accept any liability with regard to the above information or with regard to any written or verbal recommendation, except if otherwise explicitly agreed and except in relation to death or personal injury caused by Henkel´s gross negligence or intention and any liability under any applicable mandatory product liability law. Please note that the information provided by us may not be current, complete and correct. It is not intended to serve as legal advice. Each user is solely responsible for assessing and ensuring compliance with any applicable law. The information is protected by copyright. In particular, any reproductions, adaptations, translations, storage and processing in other media, including storage or processing by electronic means, enjoy copyright protection. Any exploitation in whole or in part thereof shall require the prior written consent of Henkel Balti OÜ. Except as otherwise noted, all marks used in this sell sheet are trademarks and/or registered trademarks of Henkel and/or its affiliates.