LOCTITE® 577 - 250 ml Tottle
Features and Benefits
Product image in this size is not available.
Available sizes:
Medium strength, thixotropic, general purpose thread sealant for straight-to-straight and straight-to-taper threaded fittings. Fills the space between threaded parts and seals and locks at the same time.
When you need a general-purpose thread sealant with high temperature- and contamination-tolerance, as well as effectiveness on inactive and active metals, choose LOCTITE® 577. Designed for the locking and sealing of threaded metal pipes and fittings, this product provides an instant, low-pressure seal and won't creep, shrink or shred. Perfect for use on stainless steel without the need for surface activation, it offers gap performance to 0.25 mm (0.01") and will cure even in the presence of minor surface contaminations from cutting, lubrication, anti-corrosion and protection fluids, or cleaners containing surfactants and corrosion inhibitors. Meets the performance requirements of KIWA GASTEC QA AR 214 for admixtures up to and including 100% hydrogen gas – certifications are available in select countries.
- Excellent chemical resistance
- Thixotropic for ease of application
- Medium strength for ease of disassembly
- Cures on active and inactive metals
- Registered to NSF Category P1
- DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312
Documents and Downloads
Safety Data Sheets and RoHs
- 50 ml Tottle - IDH 2068151
- 250 ml Tottle - IDH 2068161
LOCTITE 577, 50ml 2068151 en-IT
IDH:
2068151
EAN:
5010266011950
Size Case: 50 ml Tottle
LOCTITE 577, 250ml 2068161 en-IT
IDH:
2068161
EAN:
5010266011974
Size Case: 250 ml Tottle
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Agency approvals / certificates / specifications | DVGW, NSF, WRAS |
| Application method | Dispense system, Manual |
| Applications | Pipe sealing, Thread sealing |
| Breakaway torque, Steel M10 | 33.0 N·m (295.0 in./lb. ) |
| Color | Yellow |
| Cure type | Anaerobic cure |
| Key characteristics | Chemical resistant, Fluorescent, General purpose, Immediate low pressure sealing, Strength: medium strength, Surface contamination-tolerant, Temperature: high temperature, Thixotropic |
| Operating temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
| Physical form | Paste |
| Recommended for use with | Metal, Metal: passive metal, Thread type: tapered |
| Viscosity, 20 RPM | 25000.0 mPa·s |
How to
Step by Step Guide
1. Preparation
Cleaning - It is recommended to use LOCTITE® SF 7063/7064/7070 to degrease and clean surfaces prior to applying adhesive. Activation - If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), apply activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS). Allow to dry.
2. Application
Apply a 360° bead to the leading male thread, leaving the first thread free. For bigger threads, apply both on male and female threads. For manual dispensing the use of a peristaltic handgun is recommended to ensure a consistent application volume.
3. Assembly
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
4. Disassembly
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F/260°C; disassemble parts while hot. For corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.
Where to Buy
Buy Online
LOCTITE® 577
Medium strength, thixotropic, general purpose thread sealant for straight-to-straight and straight-to-taper threaded fittings. Fills the space between threaded parts and seals and locks at the same time.
- 50 ml Tottle - IDH 2068151
- 250 ml Tottle - IDH 2068161
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
What temperatures can threadlockers/thread sealants/gasketing materials work up to?
Are threadlockers/sealants/gasketing materials resistant to gasoline, diesel, engine oil, water, glycol, acids, alkalis, hydraulic fluid, etc.?
Which products are food / drinking water approved?
Which products can be used on metals/plastics?
Which thread sealants can be used on oxygen systems?
What health and safety (H&S) precautions do I need to take with product "X"?
LOCTITE® 577
Medium strength, thixotropic, general purpose thread sealant for straight-to-straight and straight-to-taper threaded fittings. Fills the space between threaded parts and seals and locks at the same time.