BONDERITE L-MR Bactericide-free Cutting Fluids

• Contains no bactericid
• Very long bath-lifetimes
• Excellent corrosion protection
• Low drag-out rate with BONDERITE L-MR 21715 B's finely dispersed emulsion
• Very good washing properties for high level of cleanliness during machining operations and grinding

Whenever working with steel, high alloy steel, cast iron, non-ferrous metals, aluminum alloys in processes including drilling, turning, sawing, milling, threading, grinding, use BONDERITE L-MR cutting fluid for excellent results. Even brass machining is partially possible.

We develop high-end, easy-to-use products that go beyond current health and safety regulations. They also make your work processes as cost-effective and green as possible: The initial fill concentration is only 5-8%, decreasing to a top-up concentration of only 0.5 to 1,5%. Rely on BONDERITE L-MR 21715 B with its low foaming tendencies for water hardnesses above 15°dH and till 80°dH.

BONDERITE L-MR products were developed with workplaces just like yours in mind. The smart cutting fluid with a very finely dispersed emulsifier system without bad smell and you can rely on safe processes for high-end results when machining and grinding:

The boron-free cutting fluid enhances workshop health and safety because it is

• Bactericide-free
• EP-Additive free
• High surface finishes 
• Contains no formaldehyde-releasing agents
• Odorless

BONDERITE L-MR 21165 also meets highest expectations in economical usage with

• good washing properties to ensure a high level of cleanliness in machines, tools and machined parts
• a low drag-out rate as the fine emulsion runs off machined parts and shavings quickly
• a low initial fill concentration (5 to 8%) and even lower top-ups (0.5 to 1%)

BONDERITE L-MR 21165 will save you time and money because of long bath-lifetime, hence cutting downtime on your machines. It is safe to use for workers and meets a variety of challenges. Whenever drilling, turning, sawing, milling, threading or grinding work is needed, you can rely on this boron-free cutting fluid.

BONDERITE L-MR 21165 achieves excellent results with a variety of materials: Specialist for all sensitive materials like Brass,copper, bronce, zinc-coated materials, pure Magnesium alloys and sure also for steel, high alloy steel, cast iron, non-ferrous metals and aluminum alloys.. Additionally, the cutting fluid features very good corrosion protection properties. With a low-foaming tendency it is suitable for water hardnesses from 5°dH -200°dH.

Henkel experts have continuously been studying the challenges of metalworking for more than 40 years. The result is a uniquely effective modular system and cutting fluids like BONDERITE L-MR 21895 with excellent properties:

• Bactericide-free
• Boron-free
• Contains no EP Additives like chlorinated paraffin's, sulfur or phosphorus
• High surface finishes
• Extended tool life
• High cleanliness
• Reduced consumption

BONDERITE L-MR 21895's benefits have convinced customers and partners worldwide: Excellent washing properties offer a high level of cleanliness for machined parts, tools and machines – saving time and money by reducing or eliminating cleaning steps. The high-lubricity cutting fluid also extends the tool life significantly while making the workplace safer, healthier and easier for workers: It offers high levels of bath-lifetimes without the need of bactericides like e.g. formaldehyde-releasing agents.

The chlorinated paraffin's, sulfur-, phosphorus- and boron-free cutting fluid BONDERITE L-MR 21895 will not discolor aluminum alloys. Its very low foaming tendency makes it especially suitable for all water hardness's from 2°dH upwards. The finely dispersed emulsion runs off the machined parts and shavings quickly, resulting in a very low drag-out rate. And with low initial fill (4-8%) and even lower top-up concentrations (0.3 to 0,8%), your business will save in real terms through lower consumption (average of 60% less consumption); fewer refills and enormous tool cost reduction.

Easily work with a broad range of materials like aluminum alloys, steel, high alloy steel, including stainless steel. Even machining of brass, grey cast iron, etc. is partially possible: For reaming, tapping, thread-milling, milling, turning, broaching, drilling, deep hole drilling, circular and flat grinding or as a centerless grinding lubricant, reach for BONDERITE L-MR 21895.