Contact us
Please fill out the form below and we’ll respond shortly. Or get in touch on Facebook today!
LOCTITE® 640
Features and Benefits
slide 1 of 2
A 1-part, low-viscosity, high-strength retaining compound with good temperature resistance. Slow cure time makes it ideal for parts that need longer positioning time, such as large diameter parts or those made of active metals, such as brass.
LOCTITE® 640 is ideal when you need a retaining compound for parts that require a longer positioning time, such as large diameter parts or those made of active metals, such as brass. This high-strength adhesive has a typical fixture time on steel of 2 hours, and a service temperature of -55°C to 175°C (-67°F to 347°F) when fully cured. The product's maximum diametrical clearance is 0.1 mm (0.0004"), and it fluoresces when exposed to UV light - great for quality control. Perfect for retaining keys and splines, eliminating backlash in worn assemblies, retaining bearings in place and preventing spin out, retaining rotor to shafts in fractional and sub-fractional horsepower motors, retaining bushings and sleeves in housings and on shafts, augmenting press fits, and restoring the fit to worn assemblies or out of tolerance parts.
- Slow curing for long assembly time
- Ideal for large diameter components
- High-strength
- Good temperature resistance
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Chemical basis / base | Methacrylate |
| Color | Green |
| Diametrical clearance | <0.1 mm |
| Fixture time | 2.0 hr. |
| Recommended for use with | Metal: steel |
| Shear strength | 22.0 N/mm² |
| Viscosity, Falling Ball 'D' @ 25.0 °C | 450.0 - 750.0 mPa·s (cP) |
LOCTITE® 640
A 1-part, low-viscosity, high-strength retaining compound with good temperature resistance. Slow cure time makes it ideal for parts that need longer positioning time, such as large diameter parts or those made of active metals, such as brass.
