FERMAPOR K31 FOOD CONTACT Foam Gaskets

FDA-compliant PU Seal for direct contact with
Food – The International Standard for Food Packaging

The FERMAPOR K31 FOOD CONTACT polyurethane foam gaskets is part of the FERMAPOR K31 product family and meets the sought-after American FDA conformity - it is considered to be the recognized standard for food packaging worldwide. The FERMAPOR K31 FOOD CONTACT is applied automatically, precisely, and seamlessly in the lid groove using the FIPFG process. The polyurethane FDA-approved seal is also proofed for direct contact with food in accordance with the EU Regulation No. 10/2011 which entered into force on 1 January 2016.

FERMAPOR K31 FOOD CONTACT with FDA conformity is used as a seamless lid seal for food containers with a filling volume from two liters. It is suitable for use in direct contact with aqueous, acid, alcoholic, fatty and dry raw food materials. This also applies for cold or hot filled or pasteurized milk and for milk products. The right ratio of the contact surface of the seal surface to the filling volume must be adhered to here.

With the FDA-compliant Polyurethane based Fermapor K31 Food Contact Foam Seal Systems you get a Range of Benefits:

Suitable for use for aqueous, acid, alcoholic, fatty and dry goods
The lids of containers which contain cold, or hot filled or pasteurized milk or milk products can also be sealed
The odor and flavor as well as the appearance and consistency of the food contained in the containers remain unaffected
Sealed against moisture, dust, harmful media, and temperature-related impacts
Protection against leakage and contamination from outside
Low water absorption and optimal adhesion to a wide variety of surfaces
Outstanding long-term behavior of the seal effect
Excellent migration behavior for the seal material used in the formulae

Benefits of the FIPFG Technology:

Fully automated and seamless application of the seal with FIPFG sealing technology
The polyurethane-based, FDA-compliant food-safe gasketin foam from the FERMAPOR K31 product family cures at room temperature
Investments in tempering ovens are not required and an additional production step is thus eliminated. This saves time and money.
Good adhesion on a wide variety of material surfaces, on certain substrates after prior pre-treatment
The fully automated application process using FIPFG sealing technology is very economical and efficient, particularly for medium-sized and large production runs.
The high process reliability of the Sonderhoff dispensing machines ensures quick, precise, and clean insertion of material into the lid groove and thus makes zero fault tolerance possible.

Approval of the Fermapor K31 Foam Seal Systems with Suitability for Food Contact by Independent Testing Institutions

The new FDA-compliant FERMAPOR K31-A-6505-1-N-FD foam seal meets the strict requirements of the American “Food and Drug Administration” (FDA) and the EU Regulation No. 10/2011 which came into effect on 1 January 2016. It replaces the previous regulations in accordance with EC No. 1935/2004 §30 in combination with §31 Para. 1 of the LFGB (German Food and Feed Code).

Accordingly, no toxic substances may migrate from plastics and sealing materials which come into contact with the foodstuffs to the food. FDA conformity is considered to be the recognized standard for food packaging worldwide.

Experts from independent testing institutions come to the conclusion, for the FERMAPOR K31-A-6505-1-N-FD foam gasket, that the values determined for total migration in the gasketing material are below the threshold value in the EU Regulation No. 10/2011 of 10 mg/dm². The contact surfaces and filling volumes during proper use must be taken into consideration here.

Contact Us

Please fill out the form below and we'll respond shortly

There are some errors, please correct them below

What would you like to request?

Technical Request

TDS

SDS

Other

This field is required

Request details

This field is required

First Name

This field is required

Last Name

This field is required

Company Name (Optional)

Postcode (Optional)

This field is required

This field is invalid

Phone (Optional)

Leave empty if you are not a bot: