TEROSON® EP 5055
Known as TEROKAL 5055
Features and Benefits
A 2-part, solvent-free, high-strength, toughened epoxy adhesive for protecting bare steel, zinc-coated steels and aluminum alloys against corrosion.
TEROSON® EP 5055 is a black (part A) and gray-green (part B) epoxy-based adhesive designed for high-strength structural bonding and corrosion-protection of bare steel, zinc-coated steels and aluminum alloys used in the automotive industry and body repair shops. It’s particularly ideal for roof and panel bonding. It reaches its initial strength (0,1MPa) in ~4h at 23°C (73°F) and cures at room temperature; curing can be accelerated via infrared heat at 60°C (140°F). For application, any professional dispensing tool with a piston rod will do, e.g. the TEROSON® ET STAKU HAND DISPENSER or the TEROSON® ET DISPENSER POWERLINE II. Before application, surface pretreatment with TEROSON® VR 10 is recommended.
- Excellent corrosion prevention
- Can be spot-welded (if not solidified)
- Adheres to a wide range of materials (without primer) such as aluminum, steel and sheet molding compounds
- Provides body stiffness, primarily for NVH purposes & weld reduction
- OEM approved
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Full cure time, @ 80.0 °C | 60.0 min. |
| Recommended for use with | Epoxy |
TEROSON® EP 5055
A 2-part, solvent-free, high-strength, toughened epoxy adhesive for protecting bare steel, zinc-coated steels and aluminum alloys against corrosion.