LOCTITE® ABLESTIK NCA 2380
Χαρακτηριστικά και οφέλη
This epoxy electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.
LOCTITE® ABLESTIK NCA 2380 dual cure adhesive is perfect for use in the assembly of temperature sensitive electronic components. It has good flow performance, excellent adhesion, and is formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. This means you can make any necessary adjustments to the final device configuration before committing it to full cure.
Διαβάστε περισσότερα
Έγγραφα και λήψεις
Ψάχνετε για TDS ή SDS σε άλλη γλώσσα;
Τεχνικές πληροφορίες
| Lämpölaajenemiskerroin (CTE) | 56.0 ppm/°C |
| Lämpölaajenemiskerroin (CTE), Above Tg | 183.0 ppm/°C |
| Θιξοτροπικός δείκτης | 2.4 |
| Ιξώδες, Shear Rate 10 s⁻¹ | 35000.0 mPa.s (cP) |
| Μέθοδος Σκλήρυνσης | Σκλήρυνση με Θερμότητα και Ακτινοβολία UV |
| Μέτρο αποθήκευσης | 3.0 GPa |
| Σημείο υαλώδους μετάπτωσης | 95.0 °C |
LOCTITE® ABLESTIK NCA 2380
This epoxy electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.