LOCTITE® 222 - 50 ml Bottle
Features and Benefits
Available sizes:
Low-strength threadlocker for the locking and sealing of small fasteners under 6.35 mm (1/4") in diameter. Prevents loosening from shock and vibration, removable with hand tools.
If you’re working with small diameter screws made of low strength metals (e.g., aluminum or brass), try LOCTITE® 222. It is ideal for low-strength threadlocking of adjustment screws, countersunk head screws, and set screws; on collars, pulleys, tool holders and controllers. It works on most metals without primer, including passive substrates such as stainless steel, aluminum and plated surfaces. It also cures through light coatings of corrosion prevention oils without having to clean the parts.
- Ideal for low-strength threadlocking of adjustment screws, countersunk head screws and set screws
- Prevents fastener loosening on vibrating assemblies, e.g. pumps, gear boxes, presses
- Ideal for small thread sizes up to 6.35 mm (1/4")
- Can be disassembled with ordinary hand tools for easy service & maintenance
- NSF P1 Reg. No. 123001
Documents and Downloads
Safety Data Sheets and RoHs
- 250 ml Bottle - IDH 142486
- 50 ml Bottle - IDH 195743
- 10 ml Bottle - IDH 267358
LOCTITE® 222, 250 ml Bottle 142486 en-FR
IDH:
142486
EAN:
5010266222721
Size Case: 250 ml Bottle
LOCTITE® 222, 50 ml Bottle 195743 en-FR
IDH:
195743
EAN:
3255460222340
Size Case: 50 ml Bottle
LOCTITE® 222, 10 ml Bottle 267358 en-FR
IDH:
267358
EAN:
4058093018118
Size Case: 10 ml Bottle
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Agency approvals / certificates / specifications | NSF P1 Reg. No 123002 |
| Application method | Dispense system, Manual |
| Application temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
| Applications | Threadlocking |
| Breakaway torque, M10 Steel Nuts/Bolts | 6.0 N·m (50.0 in./lb. ) |
| Color | Purple |
| Cure type | Anaerobic cure |
| Fixture time | 20.0 min. |
| Key characteristics | Disassembly: removable, Fluorescent, General purpose, Mix: no mix required, Strength: low Strength, Thixotropic |
| Physical form | Liquid |
| Prevail torque, M10 Steel Nuts/Bolts | 4.0 N·m (35.0 in./lb. ) |
| Recommended for use with | Metal, Metal: passive metal |
| Viscosity, Speed 20 RPM | 1200.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE® SF 7063/7064/7070 to degrease and clean surfaces prior to applying adhesive.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).
3. Application
Apply liquid threadlocker to the engagement area. For manual dispensing the use of a peristaltic handgun is recommended to ensure a consistent application volume.
4. Application - Through Hole
Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.
5. Application - Blind Hole
Apply into lower third of blind hole.
6. Assembly
Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.
7. Disassembly
Disassemble with standard hand tools.
Hint
For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.
LOCTITE® 222
Low-strength threadlocker for the locking and sealing of small fasteners under 6.35 mm (1/4") in diameter. Prevents loosening from shock and vibration, removable with hand tools.