LOCTITE® 401 - 10 g Blister card Instant Adhesive
Features and Benefits
Product image in this size is not available.
Available sizes:
A surface-insensitive, fast-fixturing instant adhesive that provides high shear strength on a wide range of materials, including difficult-to-bond substrates.
LOCTITE® 401 is a fast-fixturing instant adhesive (industrial grade) designed for the assembly of a wide range of materials where uniform stress distribution and high tensile and/or shear strength are required. Using primer LOCTITE SF 770, the assembly of difficult-to-bond (PP, PE, PTFE) materials is possible. In addition, it is suited for bonding porous materials such as wood, paper, leather and fabric.
- Universal industrial instant adhesive
- Very high strength on close-fitting parts
- Reduced hazardous ingredients for improved occupational safety
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics, and most plastics)
- Assembles difficult-to-bond materials using LOCTITE SF 770 primer
Documents and Downloads
Safety Data Sheets and RoHs
- 500 g Bottle - IDH 142578
- 20 g Bottle - IDH 1919340
- 3 g Tube - IDH 195651
- 100 g Bottle - IDH 195729
- 5 g Blister card - IDH 232659
- 20 g Blister card - IDH 275021
- 10 g Blister card - IDH 281554
- 3 g Blister card - IDH 303265
- 2 kg Bottle - IDH 431263
LOCTITE® 401, 20 g Bottle 1919340 en-FR
IDH:
1919340
EAN:
5010266007878
Size Case: 20 g Bottle
LOCTITE® 401, 3 g Tube 195651 en-FR
IDH:
195651
EAN:
4033267222249
Size Case: 3 g Tube
LOCTITE® 401, 100 g Bottle 195729 en-FR
IDH:
195729
EAN:
5010266194424
Size Case: 100 g Bottle
LOCTITE® 401, 5 g Blister card 232659 en-FR
IDH:
232659
EAN:
5010266317786
Size Case: 5 g Blister card
LOCTITE® 401, 20 g Blister card 275021 en-FR
IDH:
275021
EAN:
5010266340210
Size Case: 20 g Blister card
LOCTITE® 401, 10 g Blister card 281554 en-FR
IDH:
281554
EAN:
5010266341002
Size Case: 10 g Blister card
LOCTITE® 401, 3 g Blister card 303265 en-FR
IDH:
303265
EAN:
3255460310610
Size Case: 3 g Blister card
LOCTITE® 401, 2 kg Bottle 431263 en-FR
IDH:
431263
EAN:
5010266364025
Size Case: 2 kg Bottle
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense system, Manual |
| Applications | Bonding close fitting parts, Repairing |
| Color | Clear |
| Cure type | Moisture cure |
| Fixture time, Steel | 5.0 sec. |
| Gap fill | 0.15 mm |
| Key characteristics | General purpose, Strength: high strength, Viscosity: low viscosity, fixture: very fast fixture |
| Operating temperature | -40.0 - 120.0 °C (-40.0 - 250.0 °F ) |
| Physical form | Liquid |
| Recommended for use with | Elastomer, Metal, Plastic, Porous surface |
| Shear strength, Mild Steel (grit blasted) | 20.0 N/mm² (2900.0 psi ) |
| Viscosity | 100.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063/7064/7070) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 7239 or LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use appropriate activator LOCTITE® SF 7458 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7458 or LOCTITE® SF 7455. Spray or drop activator onto excess product.
Equipment
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.
Frequently Asked Questions
What does “non-HQ formula” mean?
Which products can be used on metals / plastics?
What health and safety (H&S) precautions do I need to take with product “X”?
Why is there a white haze on my parts around the bond area?
Do instant adhesives need to be refrigerated?
Which products are food / drinking water approved?
LOCTITE® 401
A surface-insensitive, fast-fixturing instant adhesive that provides high shear strength on a wide range of materials, including difficult-to-bond substrates.