TEROSON® RB VII - 42 m Roll Double-sided, self-adhesive and permanently plastic sealing compound
Known as TEROSTAT VII
Features and Benefits
Available sizes:
A multipurpose and multi-substrate, double-sided, self-adhesive, permanently plastic-profiled, synthetic rubber sealing cord.
TEROSON® RB VII is a black/white, double-sided, self-adhesive, permanently plastic-profiled, rubber-based sealing cord. It's typically used in sheet manufacturing for sealing overlapping steel, steel sheets, aluminium, glass, and plastic constructions, and in the automotive, wagon, and caravan industries to seal metal, wood, and plastic parts. It’s also suitable for spacing and protecting against corrosion between steel and non-ferrous metals. It also serves as a vibration damper. TEROSON RB VII is used as an inner sealant when sealing overlapping substrates, and the sealed parts need to be fixed mechanically, e.g. by clamps, screws, rivets or similar. It allows for re-opening sealed joints to perform service, repair or recycling. Before application, surface pretreatment with TEROSON® VR 10 is recommended.
- Allows dismantling of parts
- Solvent-free
- Offers good corrosion protection
- Multipurpose
- Suitable as a spacer
Documents and Downloads
Safety Data Sheets and RoHs
- 6 mm Roll - IDH 142146
- 160 m Roll - IDH 142148
- 10 m Roll - IDH 142216
- 3 m Standard cartridge - IDH 150002
- 40 m Roll - IDH 150307
- 120 m Roll - IDH 150318
- ea Roll - IDH 150320
- 42 m Roll - IDH 150321
- 64 m Roll - IDH 150324
- 30 m Roll - IDH 298166
TEROSON® RB VII, 3 m Standard cartridge 150002 en-FR
IDH:
150002
EAN:
4002872128963
Size Case: 3 m Standard cartridge
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Chemical basis / base | Butyl |
| Color | Black |
How to
Step by Step Guide
APPLICATION AREAS
TEROSON RB VII is used for sealing and as a spacer in the following areas: in sheet manufacturing industry, e.g. sealing of overlapping steel, steel sheets, aluminum, glass and plastic constructions; as protection against contact corrosion between steel and nonferrous metals.
APPLICATION:
Unroll TEROSON RB VII and cut it to the desired length. Then apply the tape to the surface requiring sealing and press it on. Experience has shown that it is best not to remove the release paper or film when unrolling the tape, but only after it has been applied and pressed on.
TEROSON® RB VII
A multipurpose and multi-substrate, double-sided, self-adhesive, permanently plastic-profiled, synthetic rubber sealing cord.