LOCTITE® ABLESTIK NCA 2200
Omadused ja eelised
LOCTITE ABLESTIK NCA 2200, Acrylated Epoxy, Dual Cure, Assembly
LOCTITE® ABLESTIK NCA 2200 dual cure adhesive is designed for use in the assembly of temperature sensitive electronic components This product is formulated to temporarily cure when exposed to UV light, followed with a secondary thermal cure at low temperature. Temporarily curing the material allows for any necessary adjustments to the final device configuration.
Lugege rohkem
Dokumendid ja allalaadimised
Otsite TDS-i või SDS-i teises keeles?
Tehniline teave
| Füüsiline vorm | Vedelik |
| Kasseti viskoossus, koonus ja plaat, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 20 s⁻¹ | 22000.0 mPa.s (cP) |
| Komponentide arv | 1-komponentne |
| Kõvenemisaeg, Soovitatav | 2.0 sekund |
| Kõvenemisaega valgusintensiivsus | 100.0 mW/cm² |
| Soovitatav kasutada koos | Keraamiline pind |
| Säilitustemperatuur | -20.0 °C |
| Tahkumistüüp | Kuum + UV-kõvenemine |
| Tiksotroopne indeks | 2.0 |
LOCTITE® ABLESTIK NCA 2200
LOCTITE ABLESTIK NCA 2200, Acrylated Epoxy, Dual Cure, Assembly