LOCTITE® 222 - Bottle 10.0/case

Features and Benefits

Product image in this size is not available.

Available sizes:

Bottle

10.0/case

Bottle

10.0/case

Bottle

10.0/case
TDS Download
Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.
LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminum or brass. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.
  • Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Especially suited to small thread sizes
  • Permits disassembly with hand tools
  • P1 NSF Reg. No.: 123002
Read More

Documents and Downloads

Technical Data Sheet
LOCTITE® 222
Download TDS
Safety Data Sheets and RoHs
  • Bottle 10.0/case - IDH 1496888
  • Bottle 10.0/case - IDH 231499
  • Bottle 10.0/case - IDH 471660
LOCTITE® 222, 250 ml Bottle 1496888 en-AU
IDH: 1496888
EAN: 9310743008531

Size Case: Bottle

Quantity: 10.0/case

Download SDS

Download RoHs
LOCTITE® 222, 50 ml Bottle 231499 en-AU
IDH: 231499
EAN: 079340222502

Size Case: Bottle

Quantity: 10.0/case

Download SDS

Download RoHs
LOCTITE® 222, 10 ml Bottle 471660 en-AU
IDH: 471660
EAN: 9310743001174

Size Case: Bottle

Quantity: 10.0/case

Download SDS

Download RoHs
No documents found

Looking for a TDS or SDS in another language?

Search for TDS in another language
Search for SDS in another language

Technical Information

Agency approvals / certificates / specifications NSF P1 Reg. No 123002
Application method Dispense system, Manual
Application temperature -55.0 - 150.0 °C (-65.0 - 300.0 °F )
Applications Threadlocking
Breakaway torque, M10 Steel Nuts/Bolts 6.0 N·m (50.0 in./lb. )
Colour Purple
Cure type Anaerobic cure
Fixture time 20.0 min.
Key characteristics Disassembly: removable, Fluorescent, General purpose, Mix: no mix required, Strength: low Strength, Thixotropic
Physical form Liquid
Prevail torque, M10 Steel Nuts/Bolts 4.0 N·m (35.0 in./lb. )
Recommended for use with Metal, Metal: passive metal
Viscosity, Speed 20 RPM 1200.0 mPa·s (cP)

How to

Step by Step Guide

1. Preparation - Cleaning

It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying adhesive.

2. Preparation - Activation

If cure speed is too slow due to passive metals (stainless steel, aluminium and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).

3. Application

Apply liquid threadlocker to the engagement area.

4. Application - Through Hole

Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.

5. Application - Blind Hole

Apply into lower third of blind hole.

6. Assembly

Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.

7. Disassembly

Disassemble with standard hand tools.

Hint

For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.