LOCTITE® 401 - Tube 10.0/case

Features and Benefits

Product image in this size is not available.

Available sizes:

Tube

10.0/case

Bottle

10.0/case

Bottle

1.0/case

Tube

10.0/case
TDS Download
A surface-insensitive, fast-fixturing instant adhesive that provides high shear strength on a wide range of materials, including difficult-to-bond substrates.
LOCTITE® 401 is a fast-fixturing instant adhesive (industrial grade) designed for the assembly of a wide range of materials where uniform stress distribution and high tensile and/or shear strength are required. Using primer LOCTITE® SF 770, the assembly of difficult-to-bond materials (PP, PE, PTFE) is possible. In addition, it is suited for bonding porous materials such as wood, paper, leather and fabric.
  • Universal instant adhesive
  • Very high strength on close-fitting parts
  • Perfect for all quick repairs and all types of small emergency repairs
  • Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics, as well as most plastics)
Read More

Documents and Downloads

Technical Data Sheet
LOCTITE® 401™
Download TDS
Safety Data Sheets and RoHs
  • Tube 10.0/case - IDH 265607
  • Bottle 10.0/case - IDH 265618
  • Bottle 1.0/case - IDH 265620
  • Tube 10.0/case - IDH 547691
LOCTITE® 401, 100 ml Bottle 265618 en-AU
IDH: 265618

Size Case: Bottle

Quantity: 10.0/case

Download SDS

Download RoHs
LOCTITE® 401, 500 ml Bottle 265620 en-AU
IDH: 265620

Size Case: Bottle

Quantity: 1.0/case

Download SDS

Download RoHs
LOCTITE® 401, 3 g Tube 547691 en-AU
IDH: 547691

Size Case: Tube

Quantity: 10.0/case

Download SDS

Download RoHs
No documents found

Looking for a TDS or SDS in another language?

Search for TDS in another language
Search for SDS in another language

Technical Information

Application method Dispense system, Manual
Applications Bonding close fitting parts, Repairing
Colour Clear
Cure type Moisture cure
Fixture time, Steel 5.0 sec.
Gap fill 0.15 mm
Key characteristics General purpose, Strength: high strength, Viscosity: low viscosity, fixture: very fast fixture
Operating temperature -40.0 - 120.0 °C (-40.0 - 250.0 °F )
Physical form Liquid
Recommended for use with Elastomer, Metal, Plastic, Porous surface
Shear strength, Mild Steel (grit blasted) 20.0 N/mm² (2900.0 psi )
Viscosity 100.0 mPa·s (cP)

How to

Step by Step Guide

1. Preparation - Cleaning

It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070™) to degrease and clean surfaces prior to applying the adhesive.

2. Preparation - Priming

To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770™ to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.

3. Preparation - Activation

If cure speed is too slow, use activator LOCTITE® SF 7452™ or LOCTITE® SF 7455™ (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.

4. Application

Apply adhesive onto one side/part.

5. Assembly

Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452™. Spray or drop activator onto excess product.

If you are using LOCTITE® 401 you might be interested in