TEROSON® PU 9225 SF ME
Features and Benefits
A 2-part, super-fast, micro-emission gray repair adhesive for body parts made of plastic.
TEROSON® PU 9225 SF ME is a gray (part A) and white (part B), polyurethane-based adhesive for vehicle repair tasks on paintable interior and exterior plastic parts. It's typically used for repairing bumpers, trim and body parts made of plastic, e.g. PP/EPDM, SMC, PC, PA, ABS, and PUR, particularly for smaller damages such as scratches or holes in bumpers, spoilers, aprons, etc. Due to its Micro-Emission (ME) property, MDI (monomeric diisocyanate) content is < 0.1% and there's no R40 risk phrase. The best application results are achieved with the TEROSON HAND DISPENSER (50 ml cartridges) and an appropriate static mixer. Before application, surface pretreatment with TEROSON VR 10 is recommended. TEROSON PU 6700 ME cures at room temperature but will experience accelerated cure when exposed to infrared heat at 60°C (140°F).
- Recommended for repair areas smaller than 7 cm
- Pot-life: 2 minutes
- Sandable after 10 minutes (23°C/43°F, 50% rh)
- Overpaintable with all car paint systems (use adhesion promoter TEROSON VR 155)
- OEM specified repair solution
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
Color | Dark gray |