Part no. (SKU/IDH):
135486
IDH Name:
LOCTITE® 545, 50 ml Bottle
Thread sealants
High-lubricity thread sealant for hydraulic and pneumatic fittings
A 1-part thread sealant, designed for locking and sealing metal pipes and fittings,. This product is specially formulated to offer high lubricity for easy assembly and removal.
Part no. (SKU/IDH):
135486
IDH Name:
LOCTITE® 545, 50 ml Bottle
Size Please make your selection 50 ml
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Ratings & reviews
- Question & answer
For fine threaded fittings, choose LOCTITE® 545. This thread sealant is perfect for small fittings in general, especially as used in hydraulic and pneumatic installations. The medium-viscosity product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration when cured. It's specially formulated to offer lubricity for the easy assembly of hydraulic and pneumatic fittings, and contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens.
-
High lubricity for easy assembly and removal
-
Recommended for fine threads
-
Contains no clogging fillers or particles
-
ABSSM and CFIA approved
- Product category:
- Thread sealants
Technologies:
-
Acrylates, anaerobic cure
- Application method:
- Dispense system,Manual
- Applications:
- Hydraulic/pneumatic sealing,Pipe sealing,Thread sealing
- Breakaway torque, Steel, M10:
- 2.0 N·m (20.0 in./lb.)
- Color:
- Purple
- Cure type:
- Anaerobic cure
- Key characteristics:
- Lubricity: high lubricity,No fillers/particles,Solvent resistant,Viscosity: medium viscosity
- Operating temperature:
- -55.0 °C - 150.0 °C (-65.0 °F - 300.0 °F)
- Physical form:
- Liquid
- Recommended for use with:
- Metal,Thread type: fine
- Viscosity, 20 RPM:
- 15000.0 mPa·s (cP)
How to use
Cleaning - It is recommended to use LOCTITE® SF 7070 Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive. Activation - If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
Starting one to two threads from leading edge of pipe, apply a 360° bead to cover three thread roots. For bigger threads, apply both on male and female threads. (Recommended dispensing equipment: LOCTITE® Pro Pump Handheld Dispenser (50ml/250ml) or LOCTITE® Peristaltic Hand Pump.
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 260°C/500°F and disassemble while hot.
FAQ
The standard continuous operating temperature range for LOCTITE® anaerobic adhesives is -65° to +300°F (-55°C to +150°C). Depending on the specific application requirements, high-performance grades are also available offering increased temperature resistance. Please consult with the Henkel technical team for availability and grade selection.
Yes, Henkel anaerobic adhesives become highly resistant thermoset polymers once cured, making them suitable for a vast number of applications. Many Henkel silicone adhesives offer excellent resistance to standard media like water/glycol, amongst other solutions. Consult our online product resources or contact our technical teams for further information.
All adhesives are compatible with metal substrates although bond strength and durability will vary depending on the technology selected. Anaerobic adhesives may cause stress-cracking in some sensitive polymers and therefore should generally be avoided on plastic parts. Consult Henkel technical teams for further advice as needed.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
