Part no. (SKU/IDH):
237107
IDH Name:
LOCTITE® EA E-20HP, 50 ml Dual cartridge
Structural adhesives
High impact- and humidity-resistant general purpose adhesive
This high impact-strength adhesive is toughened to meet demanding and versatile applications, including metal-to-metal and magnet bonding.
-
LOCTITE® EA E-20HP, 50 ml Dual cartridge en_GLIDH: 237107
-
LOCTITE® EA E-20HP, 50 ml Dual cartridge en_GLLOCTITE EA E-20HP B HARDENER known as DB EPOXY ADH E-20HP 50 ML HARD (701980)IDH: 237107
-
LOCTITE® EA E-20HP, 50 ml Dual cartridge en_GLLOCTITE EA E-20HP A RESIN known as DB EPOXY ADH E-20HP 50 ML RESIN (701979)IDH: 237107
Marketing materials
Part no. (SKU/IDH):
237107
IDH Name:
LOCTITE® EA E-20HP, 50 ml Dual cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
- Description
- Technical specification
- Ratings & reviews
- Question & answer
LOCTITE® EA E-20HP is a 2-part, high impact- and humidity-resistant structural bonder. Once mixed, it cures at room temperature to form a tough bondline with high peel resistance. It has a very high shear strength of 33 N/mm², is resistant to a wide range of chemicals and solvents, and withstands temperatures up to 150°C (302°F). Ideal for metal-to-metal bonding, it can also be used as a magnet bonder for surface and interior permanent magnets (SPM & IPM), and is an excellent electrical insulator. Bonds a wide variety of plastics, metals, dry concrete and architectural materials. Typical applications include marine in-line shaft generators.
-
High impact and high humidity resistance
-
Bonds variety of substrates including magnets
-
Temperature resistance up to 150°C (302°F)
-
Dual cure: room temperature, heat
- Product category:
- Structural adhesives
Technologies:
-
Thermosets, 2K general epoxy
- Application method:
- Dispense gun,Dispense system
- Applications:
- Bonding metal,Bonding plastic
- Cure type:
- Room temperature (ambient) cure,Two component mix
- FEA (finite element analysis):
- Finite strain,Viscoelastic
- Hardener: Color:
- Yellow
- Hardener: Specific gravity, @ 25.0 °C:
- 1.1
- Hardener: Viscosity, @ 25.0 °C:
- 5500.0 mPa·s (cP) - 8000.0 mPa·s (cP)
- Key characteristics:
- Peel strength: high peel strength,Shear strength: high shear Strength,Toughened,Viscosity: medium viscosity,Work life: medium work life
- Mix ratio, by volume:
- 2 : 1
- Mix ratio, by weight:
- 100 : 55
- Mixed: Color:
- Off white
- Mixed: Specific gravity, @ 25.0 °C:
- 1.03
- Number of components:
- 2 part
- Physical form:
- Liquid
- Recommended for use with:
- Concrete,Metal,Metal: aluminum,Metal: steel,Metal: steel - stainless steel,Plastic,Polyamide (nylon),Polycarbonate,Wood
- Resin: Color:
- Light yellow
- Resin: Specific gravity, @ 25.0 °C:
- 1.0
- Resin: Viscosity, @ 25.0 °C:
- 40000.0 mPa·s (cP) - 90000.0 mPa·s (cP)
How to use
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
Place cartridge in dispense gun. Remove cap from cartridge. Dispense a small amount so that material is coming out of both sides. Attach mix nozzle and dispense a bead at least half of the length of the nozzle. The material is ready to use.
Apply a bead of material to one of the surfaces to be bonded. Join the parts and fixture in a way to prevent movement of the part until handling strength is obtained.
FAQ
The chemistry of these adhesives involves an exothermic reaction that releases heat. Therefore, caution should be taken when dispensing large volumes of adhesive. Temperature limits vary between 180°F to 350°F (82°C to 177°C).
For 2-part epoxies use the general rule that every 50°F added to cure conditions will reduce cure time by half. It is best to not exceed 302°F. If the exothermic reaction disrupts the bond line (bubbles/foams), heat bump for 2 hours at 150°F, reduce mass of adhesive used, or gel at room temperature before heat bumping.
Glass transition temperature (Tg) is the temperature at which plastics start to go from glassy solids to a rubbery soft material like a silicone.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}} {{#distributor.onShelf}} {{#distributor.notInStock}} {{/distributor.onShelf}}There was a problem with your request. Please try again or contact us directly.
