Skip to Content
Henkel Adhesive Technologies
Recent searches

      Henkel Adhesive Technologies
      Loctite Technology Cluster Brand for Product Detail Pages

      Part no. (SKU/IDH):
      135441

      IDH Name:
      LOCTITE® 408, 20 g Bottle

      Instant adhesives

      LOCTITE® 408

      Low-bloom, very low-viscosity adhesive

      A 1-part instant adhesive ideal for tight fitting parts thanks to its very low-viscosity. Additionally delivers low-odor and low-bloom for aesthetic applications.

      Part no. (SKU/IDH) 135441
      LOCTITE® 408, 20 g Bottle

      Size Please make your selection 20 g

      All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.

      • $36.28
        In stock
        All available stock is already in cart
        You have reached the maximum order quantity available

        For industrial use only. Not intended for consumer sale or use.

        Large volume or special order?
        There are some errors, please correct them below.

      Information

      LOCTITE® 408 is a low-odor, low-bloom instant adhesive. This very low-viscosity adhesive is ideal for tight fitting parts and applications where odor and/or blooming are a concern. LOCTITE 408 provides for rapid bonding of metals, elastomers and plastics, including difficult-to-bond plastics (PP, PE, PTFE) when used in conjunction with a primer such as LOCTITE® SF 770.
      • Low-odor for applications where vapor control is vital
      • Low-bloom for cosmetic applications
      • Very low viscosity for close-fitting parts
      • Bonds plastics, rubbers and metals

      How to use

        It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.

        To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.

        If cure speed is too slow, use activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.

        Apply adhesive onto one side/part.

        Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured.Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452. Spray or drop activator onto excess product.

        For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.

      FAQ

        Low odor/low bloom instant adhesives are significantly higher in molecular weight than traditional instant adhesives. Therefore, they are less prone to become airborne when left open to air and consequently produce little to no blooming, or “frosting” effect on assemblies. They also tend to have lower odor during use.

        This is called blooming. This often occurs when there is an excessive amount of product being applied. To avoid blooming, use proper ventilation, less product, lower humidity, use a primer/accelerator, or a low bloom product.

        Yes, CA’s should be stored in the refrigerator prior to opening, but DO NOT refrigerate them once they have already been opened. After opening, CA's should be used within 30 days for best performance.

        All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.

        Henkel has several products available with varying levels of NSF® approval, amongst others. Please contact the Henkel sales or technical teams with your requirements.

      • $36.28
        In stock
        All available stock is already in cart
        You have reached the maximum order quantity available

        For industrial use only. Not intended for consumer sale or use.

        Large volume or special order?
        There are some errors, please correct them below.

      You might also need

      • Complementary
        LOCTITE SF 770 Primer - 1.75 fl oz (IDH 2759219)

        Adhesive primers

        LOCTITE® SF 770

        Instant adhesive primer for difficult-to-bond materials
        Out of stock

      Recently viewed products
      No data available

      Request a consultation

      Unplanned downtime or lower plant productivity can prevent you from achieving the manufacturing excellence that you are looking for. Consult with our experts to find ways to make your machine more reliable and reduce unplanned downtime to save costs.
      Contact an expert

      Henkel Adhesive Technologies
      Company
      About us
      Locations
      Careers
      News
      Current Customer eShop
      Sustainability
      Help
      FAQs
      Find a TDS
      Find a SDS
      Find a distributor
      Contact us
      Resource center
      Product search
      Technical Library
      Case studies
      White papers
      Webinars
      Brochures
      Social media
      ⓒ 2025 Henkel Corporation. ALL RIGHTS RESERVED
      You are on a United States website