Skip to Content
Henkel Adhesive Technologies
Recent searches

      Henkel Adhesive Technologies
      Loctite Technology Cluster Brand for Product Detail Pages

      Part no. (SKU/IDH):
      234981

      IDH Name:
      LOCTITE® SF 754, 1 qt Bottle

      Corrosion inhibitors

      LOCTITE® SF 754

      Corrosion protection - fast-drying rust treatment

      A 1-part, surface treatment solution designed to stop rust and protect surfaces from further corrosion, while acting as a primer for a finish coat.

      Marketing materials

      Part no. (SKU/IDH):
      234981

      IDH Name:
      LOCTITE® SF 754, 1 qt Bottle

      All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.

      Information

      LOCTITE® 754 Extend Rust Treatment is a fast drying, milky-white rust treatment designed to stop rust, protect sufaces from further corrosion, and act as a primer for a finish coat. It is suitable for exterior exposure without a topcoat in mild environments. Severe environments require a suitable topcoat.
      • Fast drying
      • Prevents rusting
      • Acts as a primer for finish coats
      • Can be used outside without a topcoat in mild environments
      • May be applied by brush, roller or spray

      How to use

        Mix thoroughly before using.

        Remove oil, dirt and grease from surface. Wire brush to remove flaky rust and loose scale. Some surface rust must be present.

        Pour into clean container for easy application by brushing or apply directly to surface and brush out.

        Brush or sponge on liberally. An airless spray may also be used.

        A black coating will appear within 5 minutes. Uneven color indicates need for additional coats for maximum protection. Recoat time 15 to 30 minutes. Allow 24 hours minimum to dry before finish paint.

        Most finish paints will not require any additional primer. However, light color latex and metal filled paints require a solvent based primer on top of LOCTITE® SF 754 coating before finish application.

        Brushes, rollers and other tools should be cleaned immediately with detergent and water. Flush spray equipment immediately after use with detergent and water. LOCTITE® SF 754 is difficult to remove when dry.

        Pour into clean container for easy application by brushing or apply directly to surface and brush out.

      FAQ

        No. This product is not recommended with waterbased or zinc rich top coats and primers.

      Recently viewed products

      Request a consultation

      Unplanned downtime or lower plant productivity can prevent you from achieving the manufacturing excellence that you are looking for. Consult with our experts to find ways to make your machine more reliable and reduce unplanned downtime to save costs.
      Contact an expert

      Henkel Adhesive Technologies
      Company
      About us
      Locations
      Careers
      News
      Current Customer eShop
      Sustainability
      Help
      FAQs
      Find a TDS
      Find a SDS
      Find a distributor
      Contact us
      Resource center
      Product search
      Technical Library
      Case studies
      White papers
      Webinars
      Brochures
      Social media
      ⓒ 2025 Henkel Corporation. ALL RIGHTS RESERVED
      You are on a United States website