LOCTITE® 567 - Tube 10.0/case
Features and Benefits
Available sizes:
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.
LOCTITE® 567 is a white, 1-part thread sealant designed for the locking and sealing of tapered metal pipe threads and fittings. As an anaerobic-curing thread sealant, it cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Its high lubricating properties prevent galling on stainless steel, aluminum and all other metal pipe threads, and allows ease of disassembly. The product offers high temperature performance and oil tolerance. And it tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids. Meets the performance requirements of KIWA GASTEC QA AR 214 for admixtures up to and including 100% hydrogen gas – certifications are available in select countries.
- Ideal for metal pipes and fittings
- Provides an instant low pressure seal
- NSF/ANSI 61 certified for potable water systems
- UL MH8007 & ULC MH27131 classified for natural gas systems
- Meets KIWA GASTEC QA AR 214 performance requirements for hydrogen gas systems
- Single component - clean and easy to apply
- Doesn’t creep, shrink or block systems
- Thixotropic and high/very high viscosity
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Agency approvals / certificates / specifications | UL |
| Applications | Pipe sealing, Thread sealing |
| Breakaway torque, Steel M10 | 12.0 N·m (110.0 in./lb. ) |
| Colour | Off white |
| Cure type | Anaerobic cure |
| Key characteristics | Immediate low pressure sealing, Oil tolerant, Strength: low Strength, Temperature: high temperature, Thixotropic |
| Operating temperature | -55.0 - 200.0 °C (-65.0 - 400.0 °F ) |
| Physical form | Paste |
| Recommended for use with | Metal, Metal: aluminium, Metal: steel - galvanized steel, Metal: steel - stainless steel, Thread type: coarse, Thread type: tapered |
| Viscosity, 20 RPM | 540000.0 mPa·s |
How to
Step by Step Guide
1. Preparation
Cleaning - It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying adhesive. If cure speed is too slow due to passive metals (stainless steel, aluminium and plated metals) or low temperature (below 5°C), apply activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
3. Application
Apply a 360° bead to the leading male thread, leaving the first thread free. For bigger threads, apply both on male and female threads. For manual dispensing the use of a peristaltic handgun is recommended to ensure a consistent application volume.
4. Assembly
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
Disassembly
Disassemble with standard hand tools. If not possible, apply localised heat to approximately 260°C and disassemble while hot. For corroded or seized parts, use LOCTITE® LB 8040 Freeze and Release.
Where to Buy
Buy Online
LOCTITE® 567
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.
- Tube 10.0/case - IDH 2087065
- Tube 10.0/case - IDH 2087071
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
What temperatures can threadlockers / thread sealants / gasketing materials work up to?
Are threadlockers / sealants / gasketing materials resistant to petrol, diesel, engine oil, water, glycol, acids, alkalis, hydraulic fluid, etc.?
Which products are food / drinking water approved?
Which products can be used on metals / plastics?
Which thread sealants can be used on oxygen systems?
LOCTITE® 567
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.