Process and Performance Requirements
- The on-board computer is a complex construction with several layered high-density printed circuit boards (PCBs) and cooling plates; the system requires a high thermal conductivity solution (> 6.0 W/m-K) to manage the intense thermal load.
- Any thermal interface material selected should provide the ability to leverage existing automated dispensing equipment to accommodate manufacturing efficiencies and precise deposition of diverse shapes, volumes and patterns
- Stability in operation, particularly with respect to vibration, is required to ensure reliability of this mission-critical vehicle system.
Henkel Solution and Results
Providing high thermal conductivity of 6.0 W/m-K in combination with post-deposit stability, Henkel’s BERGQUIST LIQUI-FORM TLF 6000HG thermal gel is well-suited for automotive computing system applications and has consistently performed better in evaluations than competitive materials. The one-part formulation requires no mixing and can often be applied using existing TIM dispensing equipment.
Importantly, BERGQUIST LIQUI-FORM TLF 6000HG is soft and conformable, inducing very low component stress. Excellent wet out fills gaps and displaces air across the PCB between heat-generating components and cooling plates, ensuring low thermal resistance through provision of a continuous, high conductivity thermal path.
The rugged thermal management gel provides optimum performance in challenging applications:
- High vertical stability and effective gap filling up to 3.0 mm gaps enables excellent thermal performance regardless of device orientation.
- Withstands stress, high vibration, disparate CTE tolerances, extreme temperature fluctuations and provides excellent mechanical stability.
- Automation friendly, BERQUIST LIQUI-FORM TLF 6000HG can be dispensed at a rate of 17 g/min and applied in small or large volumes, which is essential for high UPH automotive control unit production.
As automotive electronics become more sophisticated, extreme temperature control will continue to be a dominant design consideration. Demanding vehicle computing applications are increasingly incorporating BERGQUIST LIQUI-FORM TLF 6000HG.
Contact us
Please fill out the form below and we'll respond shortly.